User Control Interface - Cobalt Digital Inc 9902-UDX-DSP Product Manual

Introduction

User Control Interface

9902-UDX-DSP-OM (V1.5)
Figure 1-8 shows the user control interface options for the 9902-UDX-DSP.
These options are individually described below.
Note: All user control interfaces described here are cross-compatible and can oper-
ate together as desired. Where applicable, any control setting change made
using a particular user interface is reflected on any other connected interface.
DashBoard™ User Interface – Using DashBoard™, the
•
9902-UDX-DSP and other cards installed in openGear®
be controlled from a computer and monitor.
DashBoard™ allows users to view all frames on a network with
control and monitoring for all populated slots inside a frame. This
simplifies the setup and use of numerous modules in a large
installation and offers the ability to centralize monitoring. Cards
define their controllable parameters to DashBoard™, so the control
interface is always up to date.
The DashBoard™ software can be downloaded from the Cobalt
Digital Inc. website: www.cobaltdigital.com (enter "DashBoard" in
the search window). The DashBoard™ user interface is described in
Chapter 3,"Operating Instructions".
®
Cobalt
•
Panels – The OGCP-9000 and OGCP-9000/CC Remote Control
Panels conveniently and intuitively provide parameter monitor and
control of the 9902-UDX-DSP and other video and audio processing
terminal equipment meeting the open-architecture Cobalt
openGear™ standard.
In addition to circumventing the need for a computer to monitor and
control signal processing cards, the Control Panels allow quick and
intuitive access to hundreds of cards in a facility, and can monitor and
allow adjustment of multiple parameters at one time.
The Remote Control Panels are totally compatible with the
openGear™ control software DashBoard™; any changes made with
either system are reflected on the other. The Remote Control Panel
user interface is described in Chapter 3,"Operating Instructions".
1. openGear® is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross
Video Limited.
9902-UDX-DSP PRODUCT MANUAL
9902-UDX-DSP Functional Description
OGCP-9000 and OGCP-9000/CC Remote Control
1
frames can
®
cards for
1-21