Advertisement
Introduction
Congratulations on your purchase of a Vero V. We hope that you enjoy this product and it serves you well for many years.
In your Vero package, you should find:
- This manual
- The Vero device
- The Vero remote controller
- A power supply
- An HDMI cable
To get set up:
- Hold the Home and OK buttons on the OSMC Remote to activate the remote
- Connect one end of the supplied HDMI cable to your AV receiver or TVand the other end to the Vero
- Connect the power supply to the device fi rst, ensuring it is not yet plugged in at the mains
- Optional: if you are using optical audio, connect a cable to the deviceand your receiver
- Turn on your TV and ensure the correct source is set for the new Vero
- Plug the Vero power supply in to the mains.
Your Vero will take a few moments to boot for the very fi rst time. You can follow the on-screen instructions to get set up.
You may wish to manually confi gure your audio settings. This can be done by going to Settings ➜ System ➜ Audio.
Pairing remote
You need to pair your remote controller with your device. You can do this by holding the Home and OK keys for a few seconds
Staying updated
OSMC releases regular software updates which will continually improve and enhance the OSMC experience. It's possible that there are new updates for your Vero which will improve system performance; deliver new functionality and resolve any teething issues.
You can update your Vero by going to My OSMC ➜ Updates. We recommend that you do this to ensure that you are running the latest version of OSMC.
Your Vero will prompt you automatically when future updates are available for installation.
Troubleshooting
You may experience some diffi culty in operating your Vero or getting it set up. We have assembled a list of common issues. Do not attempt to repair the device yourself, and do not open the unit as there is a risk of electric shock.
| Problem | Solution |
| The device is not turning on | Check that the device is plugged in to the mains. You should see the on screen display when the device is booting |
| There is no picture on the screen | Ensure that the HDMI cable is connected to your receiver correctly; and that the TV is on the correct source. Try another TV to rule out a localised issue |
| There is no sound | Ensure that you have confi gured your audio settings correctly |
| The remote controller does not work | The plastic tab should be removed from the battery lid. A LED is visible during operation. If no LED is visible, change the battery. If the LED is visible but the remote does not work, re-pair the remote. |
Getting further help and support
You may need some further help with using your new Vero. You can usually get help and advice from the OSMC Website (https://osmc.tv).
The following resources are available:
- The OSMC Wiki
- The OSMC Community Forums
- Contact information to talk to the OSMC customer service team.
Product information
Name: OSMC Vero
Model: Vero V
Rating: Input 5.0V 2A
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Vero V and is the answer not in the manual?
Questions and answers