Samsung SyncMaster 50V User Manual page 23

4_E50V-3p-28p Page 21 Tuesday, July 10, 2001 4:30 PM
Table 5. Troubleshooting problems – Image (Continued )
What you see...
Screen is blank and
power indicator light is
steady amber or blinks
every 0.5 or 1 seconds
Image is not stable and
may appear to vibrate
Image is not centered
on the screen
You need the monitor
driver software
Appendix
Suggested Action
The monitor is using its power
management system.
Move the computer's mouse or
press a key on the keyboard
Check that the display resolution
and frequency from your PC or video
board is an available mode for your
monitor. On your computer check:
Control Panel, Display, Settings
If the setting is not correct, use your
computer utility program to change
the display settings.
NOTE: Your monitor supports multiscan display functions
within the following frequency domain:
Horizontal frequency:
Vertical frequency:
Maximum refresh rate:
Adjust the horizontal and vertical
position.
Download the driver from the internet at:
http://www.samtron.com
English 21
Reference
PowerSaver,
page 19.
Display Mode,
page 17.
Display Modes,
page 26.
Installing the Video
Driver, page 7.
30 kHz ~ 61 kHz
50 Hz ~ 75 Hz
1024 x 768 @ 75 Hz
H-Position, page 14.
V-Position, page 14.