1. Manuals
  2. Brands
  3. Herutu Manuals
  4. Conference System
  5. TW-800R-EXC
  6. Instruction manual

Herutu TW-800R-EXC Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Wireless Communication
TW-800R-EXC
Instruction Manual V1.20
Please use this Instruction manual correctly on reading well.
Please keep it carefully to be able to read immediately, when required.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TW-800R-EXC and is the answer not in the manual?

Questions and answers

Related Manuals for Herutu TW-800R-EXC

Summary of Contents for Herutu TW-800R-EXC

  • Page 1 Wireless Communication TW-800R-EXC Instruction Manual V1.20 Please use this Instruction manual correctly on reading well. Please keep it carefully to be able to read immediately, when required.

  • Page 3: Table Of Contents

    Table of contents ■ Outline ...................................1 ■ A main part and accessories ..........................2 ■ Safety concerns ..............................3 ■ Name and function of each part .........................8 ■ Input/output terminal Block ..........................9 ■ Installation ................................10 ■ Setting .................................13 ■ Function ................................15 1. Judgment ................................15 2.
  • Page 4 3-7. Output Time .............................33 4. Special Menu ..............................34 4-1. 7 SEG Tool<--> Total( 7 segment display method) ................35 4-2. Reg-ID List (Registered Transmitter ID Number Inspection) .............35 4-3. Setup List (the Contents Inspection of Setting) ..................35 4-4. Channel Table ............................36 4-5.
  • Page 5 TW-800R-EXC Term explanation It is a serial number (they are 10 figures at a hexadecimal number) of a transmitter. ID number The same ID number is not shipped. It is the processing which makes the transmitter which communicates, and the Pairing receiver of each other recognize.

  • Page 6: Outline

    TW-800R-EXC ■ Outline TW-800R-EXC (henceforth, this machine) is the receiver with a count function which made the unit portion with receiver TW-800R and a count function unite. The signal from transmitter TW-800T is received and the judgment of "PASS" and "FAIL" is performed according to the contents and judgment mode which are registered beforehand.

  • Page 7: A Main Part And Accessories

    TW-800R-EXC ■ A main part and accessories Receiver TW-800R-EXC TW-800R-EXC Main part (The dipole antenna for ANT2 is attached and shipped) (*FCC/IC ANT2 is fixed and shipped by resin by regulation at the time of shipment in an applicable country) Onerous option ・AC/DC adaptor...

  • Page 8: Safety Concerns

    TW-800R-EXC ■ Safety concerns Safety concerns (Be sure to read) To prevent human injury of user or damage in property from occurring, be sure to observe the precautions shown below. ■ The degree in safety hazard and damage generated by the wrong usage while ignoring the descriptions is classified by the following displays.
  • Page 9 TW-800R-EXC Warning ■For handling the power source: Be sure to observe the following precautions to prevent the AC adapter and Power cord from being heated, damaged, or ignited. ●Do not approximate the AC adapter and Power cord to a fire, or do not put them into a fire. The AC adapter and Power cord can be broken or ignited, resulting in an accident.
  • Page 10 TW-800R-EXC ■Caution for wireless Law ○Radio device in this product has been certified by the Radio Law. It does not needs a license of radio stations according to using this product. ○Do not use it close to a person with a cardiac pacemaker.
  • Page 11 TW-800R-EXC ■FCC/IC Warning (TW-800T,TW-800R) Information about FCC Standard. FCC CAUTION Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:...
  • Page 12 TW-800R-EXC Information about CMIIT(China) ・CMIIT ID TW-800T ： 2013DJ9940 TW-800R ： 2013DJ9941 ■ 使用频率:2400～2483.5MHz ■ 等效全向辐射功率(EIRP)＜＝10mW ■ 频率容限：+-75kHz 2.不得擅自更改发射频率、加大发射功率(包括额外加装射频功率放大器)，不得擅自外接天线或改用其它发射天线； 3.使用时不得对各种合法的无线电通信业务产生有害干扰；一旦发现有干扰现象时，应立即停止使用，并采取措施消除 干扰后方可继续使用； 4.使用微功率无线电设备，必须忍受各种无线电业务的干扰或工业、科学及医疗应用设备的辐射干扰； 5.不得在飞机和机场附近使用。 Production label is changed only for China as below. Transmitter TW-800T Receiver TW-800R...

  • Page 13: Name And Function Of Each Part

    TW-800R-EXC ■ Name and function of each part ●Receiver TW-800R-EXC (10) (11) (1) Power switch A power supply is turned on and off. (2)The terminal block for It is a terminal block for DC24V input. (M3) power supplies It is a Photo-Mos relay output terminal block. A contact output is performed whenever it receives the signal from a transmitter.

  • Page 14: Input/Output Terminal Block

    TW-800R-EXC ■ Input/output terminal Block ■ Input (non-voltage contact input) Work (1) Sensor input 1 point +COM Work-Select input number (2) Judge input 1 point +COM (3) Reset input 1 point +COM (4) Work Select 3 point +COM * Sensor/Judge/reset of an input signal can be changed from a cable input to a radio type by using 1 point type transmitter (TW-800T).

  • Page 15: Installation

    TW-800R-EXC ■ Installation (1) Please install this machine in the position which a transmitter to a prospect is good, is stabilized in an electric wave, and can be received. (2) Not to become a metal thing and parallel, please detach and install the antenna.
  • Page 16 TW-800R-EXC The antenna of a receiver should install so that there is no obstacle in the circumference of an antenna. Since it is a diversity antenna type, there are two antennas, but please install the receiver so that both of obstacles cannot be found in each circumference of an antenna.
  • Page 17 TW-800R-EXC Please do not carry out the following installation. An operator control panel (metal thing) on The antenna touches the operator the back and antenna.It is parallel. control panel (metal thing). Antennas touch. It is installed immediately near the power line.

  • Page 18: Setting

    TW-800R-EXC ■ Setting This machine can perform the following setup with a DIP switch aside from a setup on a LCD screen. Priority is given to a setup over a setup on a LCD screen by this switch. ●Output settin of a receiver The relay output time of a receiver, double count prevention time, and buzzer operation can be set up with a DIP switch.
  • Page 19 TW-800R-EXC ◆Buzzer sounds Big/Small DIPSW Small ◆Caution While the receiver output relay output or while receiver is in double count protect time, receiver transmit the busy signal to transmitter. Then receiver doesn’t move. When the transmitter receives the busy signal, the Green LED of transmitter flashes 3 times.

  • Page 20: Function

    TW-800R-EXC ■ Function 1. Judgment This machine judges PASS/FAIL according to the mode and the contents of a setting to be used. A judgment performs a display, a PASS/FAIL output, etc. The outline which carries out a PASS/FAIL output with the kind to display is explained.

  • Page 21: Work

    TW-800R-EXC 2. Work The work used with this machine puts the operating unit into which the count value of each tool (transmitter) is registered. A maximum of 8 kinds of works which are an operating unit can be registered into this machine. (Work No.1-8) the one contents of a work -- {(tool + count number) -- a maximum of 4 kind} is contained.

  • Page 22: Count Alarm

    TW-800R-EXC 3. Count Alarm When the interval of work with a tightening is long, it can warn by the buzzer and display. If the time set as the alarm timer is exceeded, a display will be turned on in yellow, and it sounds and warns of a buzzer.Count alarm is not performed in the state where it is FAIL(ed) "judged.

  • Page 23: Judgment Mode

    TW-800R-EXC 6. Judgment Mode In order to perform the judgment of "PASS" and "FAIL", there are four judgment modes in this machine. Although it becomes the "PASS" judging by attaining working conditions, such as a count value and various timers, it becomes the "FAIL" judging when at least one working condition cannot be attained.

  • Page 24: Judgment Type

    TW-800R-EXC 7. Judgment Type This machine can choose whether a PASS output is performed in which all the work completes whether the PASS output for every tool is carried out, or the output method of a PASS judging for every work. When performing a PASS output for every tool, for about 1 second displays a PASS judging, and outputs from a terminal box simultaneously.
  • Page 25 TW-800R-EXC Functional table Input Output Common setting Every Work setting Every tool setting Terminal block Wireless Judge type Count alarm Sensor Sensor ○ ○ ○ ○ ○ ○ ○ × × ○ ○ ○ × ○ ○ ○ × ○...

  • Page 26: Screen Composition And Setting

    TW-800R-EXC ■ Screen composition and setting 1. Screen Composition The screen of this machine consists of "Special menu" which performs the "Setting menu" and the contents check of a setting which perform "it is usually a screen" and a setup which are usually mainly displayed at the time of use, ID elimination, etc.

  • Page 27: Pairing Method

    TW-800R-EXC 2. Pairing Method It is the power supply ON, pushing RX light switch. Opening screen ＨＥＲＵＴＵ ＰＯＫＡＹＯＫＥ－ＣＯＵＮＴＥＲ ＴＷ－８００Ｒ－ＥＸＣ Ｖｅｒ＊．＊＊ Pairing screen ＜ Ｐａｒｉｎｇ Ｍｏｄｅ ＞ ＩＤ ［ ］ LED for reception (green) is flashing. The switch for pairing This machine can perform a control signal (sensor /...
  • Page 28 TW-800R-EXC ＜ Ｐａｒｉｎｇ Ｍｏｄｅ ＞ Ｔｏｏｌ Ｎｏ． ［４］ Ｏｖｅｒｗｒｉｔｅ？ □ＹＥＳ ■ＮＯ This machine can change a control signal (sensor / judgment / reset) input to radio. If the ID number of TW-800T is registered into tool No.5 - 7 in pairing mode, the input to a control signal will consist of each transmitter.

  • Page 29: Setting Menu

    TW-800R-EXC 3. Setting Menu Screen composition and the contents of a setting of the setting menu (The whole tool is set up) Setting Work Tool Setup -> tools 1-4 Count value 0-99 1. Work Select menu Count (Initial value 0)

  • Page 30: Work Select

    TW-800R-EXC 3-1. Work Select If the [1] key is pressed from the [Setting menu], it will shift to a [Work-Select] screen. [Work Select] serves as a screen for changes to each work setting screen. The contents of each work (1~8) can be registered respectively.
  • Page 31 TW-800R-EXC 3-1-2. Tool order The cursor position is moved to a [Tool- Order] by a [▲][▼]key, and it determines by the [ENT] key. The tool concluded to the first is set to 1. It or subsequent ones is set to 2, 3, and 4.
  • Page 32 TW-800R-EXC 3-1-3.Tool timer The cursor position is moved to a [Tool-Timer] by a [▲][▼]key, and it determines by the [ENT] key. Ｓｅｔｔｉｎｇ ＜Ｗｏｒｋ １＞ Ｔｏｏｌ－Ｔｉｍｅｒ （１ｓ＜６００ｓ） ■Ｔｏｏｌ １ １ｓ［ １ｓ］ □Ｔｏｏｌ ２ １ｓ［ １ｓ］ □Ｔｏｏｌ ３ １ｓ［ １ｓ］ □Ｔｏｏｌ ４...
  • Page 33 TW-800R-EXC 3-1-4.Work timer The cursor position is moved to a [Work-Timer] by a [▲][▼]key, and it determines by the [ENT] key. Ｓｅｔｔｉｎｇ ＜Ｗｏｒｋ １＞ Ｗｏｒｋ－Ｔｉｍｅｒ ［ １０ｓ］ １０ｓ （１ｓ＜２４００ｓ） Ｔｏｏｌ Ｔｏｔａｌ－Ｔ＜Ｗｏｒｋ－Ｔ One number of [1] - [2] [4] [0] [0] is inputted to change a work timer.
  • Page 34 TW-800R-EXC 3-1-5.Over count The cursor position is moved to a [Over-Count] by a [▲][▼]key, and it determines by the [ENT] key. Ｓｅｔｔｉｎｇ ＜Ｗｏｒｋ １＞ Ｏｖｅｒ－Ｃｏｕｎｔ ■Ｔｏｏｌ １ １［１］ １ ＝ ＯＫ □Ｔｏｏｌ ２ １［１］ ２ ＝ ＮＧ □Ｔｏｏｌ ３ １［１］...
  • Page 35 TW-800R-EXC ON or OFF of an alarm buzzer (buzzer at the time of count alarm), A cursor is moved by the [▲][▼] key and it determines by the [ENT] key. In any [ of ON/OFF ] case, the screen of a [alarm timer] is displayed.

  • Page 36: Sensor Input

    TW-800R-EXC If time is inputted and the [ENT] key is pressed, the screen of a [buzzer pattern] will be displayed. When synchronizing buzzer out with LED for a judgment, [Interlock (Judge- LED)] is chosen. [OFF] is chosen when not using buzzer out. In [Interlock (Judge- LED)] and [OFF], the screen of a [buzzer pattern] is not displayed.

  • Page 37: Judge Mode

    TW-800R-EXC When you use a sensor input, please choose ON, and when intact, choose OFF. [ENT] If a key is pressed, buzzer sound will sound (Pi-) and a setup will be completed. The [ESC] key is pressed when returning to the [Setting menu].

  • Page 38: Reset Timer

    TW-800R-EXC 3-6. Reset Timer If the [6] keys are pressed from the [Setting menu], it will shift to a [Reset timer] screen. Ｓｅｔｔｉｎｇ ＜Ｆ１－６＞ Reset timer input range 1-30s or OFF Ｒｅｓｅｔ Ｔｉｍｅｒ ［ＯＦＦ］ ■ １ｓ （１ｓ＜３０ｓ） □ＯＦＦ ▼ The case where a reset timer is changed, A cursor is moved by the [▲][▼] key and the [ENT] key is pressed.

  • Page 39: Special Menu

    TW-800R-EXC 4. Special Menu Screen composition and the contents of a setting of the special menu Special 0: 7 seg Tool <--> Total It chooses either. Menu 7seg LED display method Registered transmitter ID number inspection 1: Reg-ID List The contents inspection of a setting of the works 1-8...

  • Page 40: Seg Tool<--> Total( 7 Segment Display Method)

    TW-800R-EXC 4-1. 7 SEG Tool<--> Total( 7 segment display method) Whenever it presses the [0] keys in a [Special menu] screen, the cursor on a screen moves. Sum total count either (the count value for every tool) or (the count value of all the tools) can be chosen for the display method of 7 segment LED.

  • Page 41: Channel Table

    TW-800R-EXC The contents list of a setting of selected work numbers can be checked. Ｓｅｔｕｐ Ｌｉｓｔ ＜Ｗｏｒｋ １＞ Ｓｅｔｕｐ Ｌｉｓｔ ＜Ｗｏｒｋ １＞ [ ▼] Ｔ１ Ｔ２ Ｔ３ Ｔ４ Ｔ１ Ｔ２ Ｔ３ Ｔ４ ＴＣ： ０ ０ ０ ０ ＣＡ： ［ ＯＦＦ...

  • Page 42: Monitor (Status Monitor Of Input Terminal Block)

    TW-800R-EXC 4-5. Monitor (Status Monitor of Input Terminal block) If the [4] keys are pressed from a [special menu], it will shift to a [Monitor] screen. The state of an input terminal block can be checked on this screen. Ｃｏｎｆｉｒｍ...

  • Page 43: Initialize

    TW-800R-EXC ＜＜＜＜＜ Ｃａｕｔｉｏｎ！！＞＞＞＞＞ Ｒｅｇ－ＩＤ Ｅｒａｓｅ［Ｉｎｄｉｖｉｄ］ ■Ｔｏｏｌ １：０１０１００１６ＤＡ Ｒｅａｌｌｙ？ ■ＮＯ □ＹＥＳ ▼ A confirmation screen is displayed. If it is right, a cursor will be moved to [YES] and the [ENT] key will be pressed. When returning to a front screen without deleting, [NO] is chosen or the [ESC] key is pressed.

  • Page 44: Explanation Of Operation

    TW-800R-EXC ■ Explanation of operation Mode 1 PASS/FAIL is judged with the count value at the time of a Judge signal input. The "PASS" judging will be performed, if a count value is set to "0" before a Judge signal is inputted. According to the contents of a setting, lighting and the PASS output of a judgment display are performed.
  • Page 45 TW-800R-EXC (1) Normal operation P=PASS/F=FAIL Sensor <> <> <> <> Tool 1 Tool 2 Tool 3 Tool 2 Output/Judge LED Tool 1 Tool 3 (Work 1) (every tool) Output/Judge LED Work 1 (every work) Judge Reset Reset timer Tr(MAX30s) *3 ->Trx *4 ->Trx...
  • Page 46 TW-800R-EXC (2) A count input is carried out before a sensor input, and it is FAIL display. When the count was inputted before the <example>sensor input and FAIL Judge-LED lights up Sensor <> <> -> work is usually possible. Tool 1...
  • Page 47 TW-800R-EXC (4) FAIL generating after a Judge input P=PASS/F=FAIL When the count of the tool 2 was insufficient and FAIL output is carried out after a <example>Judge. Sensor ◇ ◆ ◆ ◇ Tool 1 Tool 2 Tool 3 Tool 2...
  • Page 48 TW-800R-EXC (6) At the time of Over count generating P=PASS/F=FAIL When the Over count occurred by a count input excessive after a PASS output before being reset and FAIL output is carried out in normal operation Sensor ◇ ◆ ◆ ◇...
  • Page 49 TW-800R-EXC ■ In the case of the sequence ON Setting item Tool 1 Tool 2 Tool 3 Tool 4 Sensor selection Work 1 Sensor Sequence Reset timer Tr(**s) Output time To(**s) Work timer Tool count Tool timer Tool order Over count...
  • Page 50 TW-800R-EXC (2) At the time of a count alarm setup P=PASS/F=FAIL <Example> When it was warned since the following work with a bundle was not done within the set period, but work with a bundle was resumed and it returns to normal operation Sensor ◇...
  • Page 51 TW-800R-EXC (3) At the time of procedure mistake generating P=PASS/F=FAIL When the tool 3 was accidentally worked during the work of the <example>tool 2, the count was inputted and it becomes FAIL output by a procedure mistake. Sensor ◇ ◆...

  • Page 52: Mode 2

    TW-800R-EXC Mode 2 PASS/FAIL is judged by the count value and a work timer. Time until all the contents of the work chosen after performing the first 1 count input other than a count value are completed is set up. It will become the "PASS" judging if all the count values are 0 (zero) within work timer time. It will become the "Fail"...
  • Page 53 TW-800R-EXC (1) Normal operation P=PASS/F=FAIL Sensor ◇ ◆ ◆ ◇ Tool 1 Tool 2 Tool 3 Work timer -> Tw start The end -> of Tw Tool 1 Output/Judge LED Tool 3 Tool 2 (Work 1) (every tool) Output/Judge LED...
  • Page 54 TW-800R-EXC (4) The return from FAIL generating after work timer set-period progress P=PASS/F=FAIL When the count of the insufficiency was inputted and it becomes a PASS output, before being reset although the set period of the work timer passed and it became FAIL output.
  • Page 55 TW-800R-EXC (6) At the time of Over count generating (in the middle of [ work ]) P=PASS/F=FAIL When the Over count occurred with one of tools and it becomes FAIL output during work Sensor ◇ ◆ ◆ ◇ Tool 1...
  • Page 56 TW-800R-EXC ■ When a sequence "OFF" and sensor input are the work timers TRG Setting item Tool 1 Tool 2 Tool 3 Tool 4 Work Select Work 1 Sensor Work timer TRG Sequence Reset timer Tr(**s) Output time To(**s) Work timer...
  • Page 57 TW-800R-EXC ■ In the case of the sequence ON Setting item Tool 1 Tool 2 Tool 3 Tool 4 Work Select Work 1 Sensor Sequence Reset timer Tr(**s) Output time To(**s) Work timer Tw(**s) Tool count Tool timer Tool order...
  • Page 58 TW-800R-EXC (2) At the time of a count alarm setup P=PASS/F=FAIL <Example> When it was warned since the following work with a bundle was not done within the set period, but work with a bundle was resumed and it returns to normal operation Sensor ◇...
  • Page 59 TW-800R-EXC (3) FAIL generating at the time of a count alarm setup P=PASS/F=FAIL <Example> When it was warned since the following work with a bundle was not done within the set period, but the work timer deadline was passed and it becomes FAIL output Sensor ◇...
  • Page 60 TW-800R-EXC (4) Return from FAIL generating at the time of a count alarm setup. P=PASS/F=FAIL <Example> It is although it was warned since the following work with a bundle was not done within the set period, and the work timer passed the deadline and the FAIL output was carried out, Since all subsequent work was made to complete before reset, when a PASS output is carried out.
  • Page 61 TW-800R-EXC (5) At the time of procedure mistake generating P=PASS/F=FAIL When the tool 3 was accidentally worked during the work of the tool 2, the count was inputted and it becomes FAIL output by a procedure mistake. Sensor ◇ ◆...

  • Page 62: Mode 3

    TW-800R-EXC Mode 3 PASS/FAIL is judged by the count value and a tool timer. After performing the first 1 count input other than a count value, work is completed to within a time which is set as the tool, and work is completed to within a time which the following tool is set similarly. It will become the "PASS"...
  • Page 63 TW-800R-EXC (1) Normal operation P=PASS/F=FAIL Sensor ◇ ◆ ◆ ◇ Tool 1 Tool timer *1 <- -> *2 Tool 2 Tool timer <- -> Tool 3 Output/Judge LED Tool timer <- -> Tool 3 Output/Judge LED Tool 1 Tool 2...
  • Page 64 TW-800R-EXC (3) FAIL generating after tool timer set-period progress P=PASS/F=FAIL When the set period of the tool timer passed with the tool 3 and it becomes FAIL output but during <example>work Sensor ◇ ◆ ◆ ◇ Tool 1 Tool timer <-...
  • Page 65 TW-800R-EXC (5) At the time of Over count generating P=PASS/F=FAIL When the tool was inputted within reset input or reset timer time after the completion of work and it becomes FAIL output at an Over count Sensor ◇ ◆ ◆ ◇...
  • Page 66 TW-800R-EXC (7) At the time of procedure mistake generating P=PASS/F=FAIL When the tool 3 was accidentally worked during the work of the tool 2, the count was inputted and it becomes FAIL output by a procedure mistake. Sensor ◇ ◆...
  • Page 67 TW-800R-EXC (8) At the time of a count alarm setup P=PASS/F=FAIL <Example> When it was warned since the following work with a bundle was not done within the set period, but work with a bundle was resumed and it returns to normal operation Sensor ◇...
  • Page 68 TW-800R-EXC (9) FAIL generating at the time of a count alarm setup P=PASS/F=FAIL <Example> When it was warned since the following work with a bundle was not done within the set period, but the tool timer deadline was passed and it becomes FAIL output Sensor ◇...
  • Page 69 TW-800R-EXC (10) Return from FAIL generating at the time of a count alarm setup. P=PASS/F=FAIL <Example> It is although it was warned since the following work with a bundle was not done within the set period, and the tool timer passed the deadline and the FAIL output was carried out, Since all subsequent work was made to complete before reset, when a PASS output is carried out.

  • Page 70: Mode 4

    TW-800R-EXC Mode 4 It judges by the count value, the work timer, and a tool timer. It becomes the "PASS" judging by attaining all the conditions in the mode 1 - the mode 3. The function and allotment in the mode 4 which can be set up serve as the following table.
  • Page 71 TW-800R-EXC (1) Normal operation P=PASS/F=FAIL Sensor ◇ ◆ ◆ ◇ Tool 1 Tool timer <- -> Tool 2 Tool timer <- -> Output/Judge LED Tool timer <- -> Work timer -> Tw start The end -> of Tw Tool 3...
  • Page 72 TW-800R-EXC (3) FAIL generating after tool timer set-period progress P=PASS/F=FAIL When the set period of the tool timer passed with the tool 3 and it becomes FAIL output but during work Sensor ◇ ◆ ◆ ◇ Tool 1 Tool timer <-...
  • Page 73 TW-800R-EXC (4) The return from FAIL generating after tool timer set-period progress P=PASS/F=FAIL Although the set period of the tool timer passed and it became FAIL output during the work of the tool 2. -- yet -- the inside of the set period of a work timer -- moreover When the count input (work resumes) was carried out before reset input and it becomes a PASS output.
  • Page 74 TW-800R-EXC (5) FAIL generating after work timer set-period progress P=PASS/F=FAIL When the set period of the work timer passed before starting the work of the tool 3, and it becomes FAIL output Sensor ◇ ◆ ◆ ◇ Tool 1 Tool timer <-...
  • Page 75 TW-800R-EXC (7) The return from FAIL generating after a tool timer and work timer set-period progress P=PASS/F=FAIL Under although it became FAIL output by the deadline of the tool timer during the work of the tool 2, after carrying out a count input and returning the work of the tool 3 When the deadline was passed, the count input (work resumes) was carried out before reset input after FAIL output.
  • Page 76 TW-800R-EXC (10) At the time of a count alarm setup P=PASS/F=FAIL <Example> Since the following work with a bundle was not done within the set period, it was warned, but work with a bundle is resumed, and it returns to normal operation, and is on the last target.
  • Page 77 TW-800R-EXC (11) FAIL generating at the time of a count alarm setup (tool timer FAIL) P=PASS/F=FAIL <Example> When it was warned since the following work with a bundle was not done within the set period, but the tool timer deadline was passed and it becomes FAIL output Sensor ◇...
  • Page 78 TW-800R-EXC (12) Return from FAIL generating (tool timer FAIL) at the time of a count alarm setup. P=PASS/F=FAIL <Example> It is although it was warned since the following work with a bundle was not done within the set period, and the tool timer passed the deadline and the FAIL output was carried out, Since all subsequent work was made to complete before the end of a work timer, and reset, when a PASS output is carried out.
  • Page 79 TW-800R-EXC (13) FAIL generating at the time of a count alarm setup (work timer FAIL) P=PASS/F=FAIL When the work timer deadline was passed and it becomes FAIL output, before starting the work of the tool 2 of the tool 3 after the end of work.In this case, since tool work is not done, the warning by count alarm does not come out.
  • Page 80 TW-800R-EXC ■ When a sensor is the work timer TRG Setting item Tool 1 Tool 2 Tool 3 Tool 4 Work Select Work 1 Sensor Work timer TRG Sequence Reset timer Tr(**s) Output time To(**s) Work timer Tw(**s) Tool count...

  • Page 81: Specification

    TW-800R-EXC ■ Specification - TW-800 Common specifications About a wireless-communications portion, they are "TW-800R" and the specification. Items Specification Standard 2.4GHz Small electric power data communication system Emission designation Frequency band 2,403MHz-2,476MHz Channel 76CH Modulation way GFSK Communication way Simplex Power of antenna 2.1mW...
  • Page 82 TW-800R-EXC - Receiver with a count function TW-800R-EXC Item Specification ・OUT1 output (TW-800R main part side) Contact output 1 point (terminal block M3) Contact mechanism MOS-FET/1a Rated load voltage AC/DC 30V Rated load current 0.5A Output ・JUDGE output PASS/FAIL (count unit side)

  • Page 83: Dimensional Drawing

    TW-800R-EXC ■ Dimensional drawing...

  • Page 84: After Service And Warranty

    Sales Office. The latest warranty and repair regulations can be found on our website. 〔Warranty Regulation〕 This regulation (hereinafter referred to as the "Regulation") is for post-shipment warranty provided by HERUTU ELECTRONICS CORPORATION (hereinafter referred to as the "Company") so that you can use the Company's product you have purchased with confidence.
  • Page 85 This regulation (hereinafter referred to as the "Regulation") shall be applied to paid repair service (hereinafter referred to as the "Service") provided by HERUTU ELECTRONICS CORPORATION (hereinafter referred to as the "Company"). The Regulation does not apply to special order products (custom products). In addition, purchased products shall be subject to relevant manufacturer's repair regulations, and the Regulation shall not apply.
  • Page 86 TW-800R-EXC issues an order form before the end of the repair implementation period. Purpose of the Service The Company will provide the Service for the purpose of repairing the function and performance of the Company's product used by the customer if it fails beyond the scope of the warranty specified in the warranty regulation.
  • Page 87 TW-800R-EXC quotation, or if the customer does not accept the quotation and the customer expresses an intention not to carry out the repair, the Company will assume that the customer has canceled the request for the Service, and the Company will return the Product for repair to the customer without carrying out the repair.
  • Page 88 HERUTU ELECTRONICS CORPORATION 422-1 Higashimikata-cho, Kita-ku, Hamamatsu, Shizuoka, 433-8104 Japan (Sales dept) TEL.+81-53-438-3555 FAX. +81-53-438-3411 Website URL https://www.herutu.co.jp/en/ E-mail info@herutu.co.jp...

Table of Contents