985 094 – 35 Rev A COPYRIGHT INFORMATION Ainsworth Game Technology Limited claims copyright on each page of this document. The right to reproduce, distribute, display and make derivative works from this document, or any portion thereof requires approval from Ainsworth Game Technology Limited.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A INTRODUCTION This Service Manual is intended for use by the appropriate service personnel servicing the approved Historical Horse Racing Pari-Mutuel Wagering Terminal (Wagering Terminal), which is identified on the cover page.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Terminal Body Assembly The Terminal Body Assembly consists of four major assemblies: The Main Terminal Assembly, the Main Door, the Belly Door Assembly and the Monitor Door Assembly. There are three lock assemblies mounted on the right side of the terminal.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Single 22” Monitor Assembly The Single Monitor Assembly is comprised of a Monitor Mask, a Monitor Control Panel and a Frame that includes the 1 x 22” monitor. To access the Monitor Frame and the Monitor Control Panels it is required to open the Monitor Door Assembly (labelled below).
Page 9
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Lift Knob to Unlock Monitor Door UBA Bill Acceptor Monitor Door Release Gas Strut on Monitor Door Power LED Assembly on Monitor Control Panel Power and Connections Touch Screen Connection Monitor Door Opened...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Monitor Controls. Power LED (Turned Off) Monitor Control Panel Note: The monitor control panel is located at the rear of the LCD assembly on the bottom left hand side and has an LED to show power is applied to the monitor.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Main Door Assembly The Main Door is situated at the front of the Terminal Body and includes the Belly Door Assembly, the Optional Coin Validator and Chute Mechanism, the Chip Tray, the Player Tracking Module (where fitted) and the speakers, as labelled below.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Button Panel The Button Panel consists of illuminated push buttons that the patron uses to interact with the Wagering Terminal. The buttons also allow the operator and service technician to carry out testing and audit functions on the terminal.
Page 13
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Belly Panel Door Assembly The Belly Panel Door is situated at the front of the Main Door and includes the Button Panel assembly, the Belly Panel Artwork and LED Belly Panel lighting. The Belly Panel assembly is also used to access the BACC Stacker Assembly during cash clearances by venue staff.
Page 14
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Belly Panel Door Assembly (Con’t) Button Access to Panel and Stacker Door Backlight through Connector Belly Panel Harness Door Belly Door Open Detection Switch Button & Button panel Gas strut on Belly Panel Door Open access through Belly...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Note Validator Assembly Note Validator Diagnostic LED’s Note Validator Note Validator locking lever Note Note Door Stacker Security Lock Housing Note Validator Note Validator The Note Validator receives notes that are entered through the Note Bezel and accepts or rejects notes by testing them.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Note: The Note Validator Head can be separated on a pivot to provide access to clear minor note jam clearances. The Note Validator incorporates an illuminated bezel that indicates to the patron whether the Note Validator can accept notes and a label showing which denominations.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Printer (Optional) The Printer is an optional device which is fitted to our A560X-L Wagering Terminal. The Printer is located beside the Logic Cage and the tickets exit through the top of the main door. It is possible to obtain from AGT further assistance regarding the ticket printer in the form of technical / service manuals on request.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Player Tracking Module Provision Space is provided above the Note, Printer and Coin in Bezels in the door for a Player Tracking Module to be fitted. The Player tracking can be mounted on the door or in a tray (preferred). Note: To access this space the Main Door assembly must be open.
Page 20
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Logic Cage Security Mainboard Switch Handle (Pull to remove Mainboard Compact Mainboard Flash Tray Card Slots Mainboard Status LEDs Logic Cage Security Door Open A560X-H Wagering Terminal Motherboard Front Panel Layout Page 20 of 107...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Mainboard Assembly Heat Sink and Fans Assembly Mainboard Mainboard Tray Status LEDs A560X-H Wagering Terminal Mainboard Assembly The major circuit boards within the Logic Cage are: Mainboard The main board provides the controlling and operating function of the terminal. The compact flash cards and system memory are all fitted to the main board and together incorporate the main board assembly.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Backplane Board The Main Board Assembly is connected to the Backplane Board. All peripherals and I/O Devices in turn are also connected to the Backplane Board. In summary the role of the Backplane Board is to link the software to all physical devices.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Basic Operation Power Up When the terminal has been set up, turn it on using the Wagering Terminal Main Power Switch located on left hand side of the Logic Cage. When the terminal is switched on it undergoes an initialization sequence where many testing functions are carried out automatically.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Specifications The following information is provided for the Installation Technician on terminal configuration, the physical, electrical, and environmental specifications of the terminal, and the standards to which the terminal complies.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A It is strongly recommended that all AGT terminals be provided with a mains supply that includes earth leakage protection. This will protect the user, installation technician and the terminal(s) from a faulty mains supply.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Inspection After securing the terminal on its bench, it is recommended to perform a detailed inspection to ensure that the terminal has not sustained any damage during transit. Exterior Carry out a detailed visual inspection of the exterior of the terminal to verify the following: •Exterior panels, moldings, and fittings are free from dents or scratches.
A560X-L Wagering Terminal to an approved base/console. Ainsworth recommends a minimum of 3 bolts be used for the mounting of the terminal. Prior to installation the HHR location will need to mark out the hole locations before bolting the terminal down to the approved base/console.
Page 30
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A The recommended holes to use for the mounting bolts are as follows: A. The front left mounting hole as you are standing at the front of the terminal. B.
3. Power on the Wagering Terminal. 4. The Base and TM CF card will now be checked. 5. As the A560X-H Wagering Terminal boots up a blue Ainsworth screen will appear with the following message: NVRAM & E2PROM Cleared – Reset the Dip Switch 1 and 2 to continue.
Page 32
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 8. The Wagering Terminal IP Config screen will then be displayed as follows: Wagering Terminal IP Config Screen 9. Connect a keyboard to the USB3.0 port on the A560X-L Wagering Terminal Motherboard front panel.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Chapter 3 Technician Maintenance and Troubleshooting Page 33 of 107...
Page 34
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A System Maintenance / Audit This section below describes how the System Tests Mode can be used to further assess various hardware components and peripherals to determine if they are faulty. This is primarily used by technicians to help them isolate any hardware problems with the Wagering Terminal.
Page 35
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A At the completion of maintenance; exit the Maintenance / Audit Menu as follows: 1. Select the INFO TAB at the top of the screen, indicated below 2. Select the Exit Maintenance icon to exit the Maintenance mode. This will take you back to the normal Game Display.
Page 36
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Bill Acceptor Validator Test Use the Bill Acceptor Validator Test to prove the operation of the Bill Acceptor. This test has the advantage that inserted notes are returned when the Reject button is selected and not guided to the stacker.
Page 37
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Bill Acceptor / Ticket Test Results Note: Select REJECT to return the Bank Note and not stack it. Select QUIT to exit the Bill Acceptor / Ticket Test Results screen Page 37 of 107...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Printer Test The Printer Test is used to determine if the Printer is acknowledged by the software. It is a basic test that initiates the Printer to print out a test ticket. Note: Upon entering this page if there is an outstanding fault with the Printer, such as a paper jam for example, it would be reported on lower portion of the screen by highlighting the PRINTER in Yellow or Red.
Page 39
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Printer Test Results Screen Select OK to exit the Printer Test Results screen Page 39 of 107...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Touchscreen Calibration The Touchscreen Calibrate on the Hardware Tab is used to calibrate the Touchscreen. It is a basic test that requires the user to touch squares on the LCD screen and the squares become highlighted indicating where the user has touched.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Door Switch Test Select the Switches Tab and use the door switch test to check the door interlocks. The display shows the condition of each of the door sensors (the various doors that can be tested are displayed in the screen shot displayed below).
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Terminal SHA-1 Verification The Terminal SHA-1 Verification allows an operator or a technician to determine the SHA-1 of the installed Game Software, Base Software and BIOS and compare these against the jurisdictional approval certification.
Page 43
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A SHA-1 Signature Test Results Screen Page 43 of 107...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A General Maintenance This section provides information for routine servicing of the A560X-L Wagering Terminal. The instructions are limited to those that are deemed appropriate to be carried out on-site with minimum disruption to the terminal operation.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Removing Note Stacker Reverse the procedure to close and lock the Note Stacker Door. Note Validator Jam Clearing To clear jams in the Note Validator use the following procedure. Do not attempt any other maintenance of the Note Validator;...
Page 46
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 2. Open the Note Validator Note Path. This is done by pulling up the lever and lifting the lid of the unit as displayed below. 3. This will open the unit exposing the jammed note. Remove the note to clear the jam. Note Validator Note Path Note Validator Internals 4.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A When you have finished, you must reset the terminal by rotating the Credit Reset / Audit Mode switch momentarily to the Reset position. Note Validator Cleaning The Note Validator may reject notes with increased frequency as deposits on the Validator sensors accumulate.
Page 48
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A A560X-L Wagering Terminal PSU Side Panel Page 48 of 107...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Monitor Assembly The Monitor Controls are mounted on the rear of the LCD Panel. Open the Monitor Door Assembly to adjust the Monitor. Single 22” LCD Monitor Assembly Monitor Mask Assembly...
Page 50
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Lift Knob to unlock monitor door UBA Bill Acceptor Monitor Door Release. Power LED on Gas Strut on Monitor Control Monitor Door Panel Assembly Power and Connections Touch Screen Connection Monitor Door Opened.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Monitor Adjustment Illustrated below is the monitors Key Control Board. The Key Control Board is used to fine tune and adjust the monitor. To access the control board the Monitor Door of the unit must be opened. The monitor control panel is located at the rear of the LCD assembly on the bottom left hand side and has an LED to show power is applied to the monitor.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A OSD Control Functions Page 53 of 107...
Page 54
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A LCD Monitor Replacement WARNING Check that you have disconnected electrical power from the terminal prior to carrying out removal/installation procedures. The 22” LCD monitor operates at very high voltages. Exercise extreme caution when handling the monitor or personal injury may result.
Page 55
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Bracket Locating Loosen the two screws Lift the Monitor Assembly up to remove from the Wagering Terminal Use the handles located on the top of the LCD Assembly to remove and Install the LCD Monitor Assembly...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Installation Procedure: 1. Slide the monitor onto the bottom locating pin. 2. Connect the top bracket to the terminal using the locating pin and tighten the two screws. 3.
Page 57
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 3. Remove the 5 x fasteners from the bottom of the monitor mask assembly and the monitor mask can now lifted off the Monitor Assembly. Bottom of the Monitor Assembly Remove the 5 x fasteners located here...
Page 58
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A The nuts requiring removal to disassemble the monitor assembly are circled in red. R/H Side Remove the 4 x screws at the top of assembly Top of the Monitor Assembly Remove the 2 x screws at...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Reassembling the 22” LCD Monitor Assembly To reassemble the 22” LCD assembly is basically the reversal of how it was disassembled. Please take note of the following items. 1.
Page 60
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Speaker Replacement (Con’t) The monitor door speakers can be removed and installed by carrying out the following procedure: 1. Unlock and open the Main Door. 2. Power down the Wagering Terminal. 3.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Subwoofer Replacement The Subwoofer can be removed and installed by carrying out the following procedure: 1. Unlock and open the Main Door. 2. Power down the Wagering Terminal. 3.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Main Door Sub-Assemblies The following instructions describe removal and installation of Main Door sub-assemblies. Main Door Opening The following procedure details how to open and close the Main Door. Note: If the Main Door is unlocked or opened while the terminal is on, alarms will sound, and messages will be generated.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Belly Panel Door Assembly The Belly Panel Door is situated at the front of the Main Door and includes the Button Panel assembly, the Belly Panel Artwork and LED Belly Panel lighting. The Belly Panel assembly is also used to access the BACC Stacker Assembly during cash clearances by venue staff.
Page 64
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Belly Panel Door Assembly (Con’t) Access to Stacker Door through Belly Panel Button Door Panel and Backlight Connector Harness Belly Panel Door Open Gas strut on Button & Button panel Belly Panel Door access through Belly Panel Door...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Button Panel Replacement The Button Panel can be removed and installed by carrying out the following procedure. 1. Unlock and open the Main Door and Power down the Wagering Terminal. 2.
Page 66
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Button Panel Replacement (Con’t) Button Panel and Backlight Connector Harness Disconnect the Button Panel connector Harness The Button Panel can now be removed Page 66 of 107...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Button Panel Installation The Button Panel can be installed by carrying out the following procedure: 1. Open the Belly Door to gain access to the underside of the Button Panel. 2.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Changing the Artwork in the Belly Panel Changing the Artwork within the Belly Panel is easily done by following these steps: 1. Open the Main Door and power down the Wagering Terminal. 2.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A LED Light Panel Replacement Changing the LED Light Panel within the Belly Door is easily done by following the steps: 1. Open the Main Door and power down the Wagering Terminal. 2.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Internal Components Replacement The following instructions describe replacement of the Note Validator Assembly, the Printer and the Player Tracking Module. Note Validator Replacement The Note Validator displayed below is a JCM UBA Note Validator. It is a general guide which is common to most Bill Validators.
Page 71
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Installation If the Note head was faulty just replace the head and reinsert it back into its housing and follow these steps: 1. Power up the Wagering Terminal. 2.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Note Validator Housing Replacement The following procedure explains the process for removing the Note Validator Housing including the UBA frame; however, this process is the same for all Note Validators used in the A560X-L Wagering Terminal.
Page 73
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 6. Next remove the Cashbox Coin Chute by undoing the 8mm bolt fastening it into place; the bolt is accessed via a hole in the bottom of the Note Validator Housing. Undo the 8mm Bolt fastening the Cashbox Chute through a hole in...
Page 74
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 8. Next remove the 2 x screws in the top of the Note Validator Housing fastening the housing to the Terminal Shelf Assembly. 2 x holes intentionally left The 2 bolts empty fastening the...
Page 75
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 10. The Note Validator Housing can now be removed by lowering it down and sitting it in the base of the terminal so that the JCM UBA harness can be removed before removing it completely from the terminal.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Installation The installation of the Note Validator Housing and the UBA frame is the reversal of removal; however, when fitting the housing back into the terminal please take note of the following item: 1.
Page 77
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 6. The UBA Frame can now be lifted and forward and then out of the Note Validator Housing while taking care not to damage the Harnessing. 7. Before removing the UBA frame completely the UBA BV harness will need to be removed from the rear of the frame.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Printer Replacement (Optional) A ticket printer is an optional extra. The model of the ticket printer used will also vary according to the market requirements. Illustrated is the Ithaca 950 Ticket printer: Ticket Supply Ticket...
Page 79
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Removal The Printer simply rests in its printer housing. It has one plug underneath at the back, which only needs to be detached to remove the complete printer unit (with housing). To remove the printer: 1.
Page 80
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Removal To remove the printer and housing: 1. Unlock and open the Main Door. 2. Power down the Wagering Terminal. 3. Remove the printer as per the instructions outlined above. 4.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Player Tracking Module Fitment The Player Tracking Module Blank can be removed and a PTM installed by carrying out the following procedure. 1. Unlock and open the Main Door. 2.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Power Supply Replacement A560X-L Wagering Terminal uses an integrated Universal Power Supply. The power supply is mounted below the Printer and Logic Cage assemblies and is at the rear of the Wagering Terminal. WARNING Disconnect the terminal from the electrical supply prior to carrying out any maintenance on the power supply and ensure no other person can re-connect...
Page 83
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Interface Power Switch Interface Power Circuit Output Breaker Reset Button Mains Power in Connection A560X-L Wagering Terminal PSU Side Panel Mains Switch Backplane Connection Board Power Harness A560X-L Wagering Terminal PSU Top Panel Page 83 of 107...
Page 84
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Diagnostics To aid in diagnostics the Wagering Terminal Backplane Board has four blue status LED’s, each LED represents a pre-set voltage. The LED’s are (from left to right below): +24V, +12V AUX, +12V and 5V. If any of the Status LED’s are dim or not on this may represent a fault on a Power Rail.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Installation To install the Backplane Board: 1. Disconnect the Wagering Terminal from the Mains Supply. 2. Ensure that the Wagering Terminal Main Power Switch is OFF. 3. Ease the Power Supply carefully into the Terminal. 4.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Fiber Optic Interface, Optional The Fiber Optic Interface is attached to the left panel of the Wagering Terminal in front of the power supply and below the Ticket Printer shelf location. The Serial Interface Cable connects to the RJ12 connection on the Backplane Board and power is supplied by the Interface Power output Connection on the PSU.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Logic Cage Assembly Mainboard Replacement Removal: 1. Unlock and open the Main Door to provide access to the Logic Cage. 2. Power down the Wagering Terminal. 3. Break and remove the security tag seal from the Logic Cage and unlock the door. 4.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Backplane Board Replacement Note: This procedure requires extreme care and is a relatively lengthy process. Be sure replacement is required prior to beginning. Removal: 1. Unlock and open the Main Door to provide access to the Logic Cage. 2.
Page 89
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A A560X-L Wagering Terminal Backplane Board Page 89 of 107...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Logic Cage and Backplane Board Replacement This procedure is for when the Backplane Board is still part of the Logic Assembly Note: This procedure requires extreme care and is a relatively lengthy process. Be sure replacement is required prior to beginning.
Page 91
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Remove this fastener at the rear of the Logic Cage A560X-L Wagering Terminal Logic Cage top rear fastener location 4 x M5 Nuts to be removed from the roof of the logic cage A560X-L Wagering Terminal Logic Cage Top Fastener Location...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A RAM Clear The RAM Clear process is only to be performed for a major fault or to change the base/game type. In the event of a major fault turn the Rest/Audit Key to the Audit position to enter the Maintenance Mode: 1.
Page 93
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 3. Select the Info Tab. 4. Open the Logic Cage Door. 5. Select the RAM Clear to restart the Wagering Terminal. Page 93 of 107...
Page 94
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 6. Select YES to clear Meter 1 & 2 Data, Bill / Ticket Acceptor History, XCredit History History File, and Restart the terminal. 7. Once yes is selected, the machine will reboot, and the logic door may be closed. Page 94 of 107...
6. Power on the Wagering Terminal. 7. The Base and TM CF card will now be checked. 8. As the A560X-L Wagering Terminal boots up a blue Ainsworth screen will then appear with either of the following messages: NVRAM & E2PROM Cleared – Reset the Dip Switch 1 and 2 to continue.
Page 96
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 11. The IP Config screen will then be displayed; enter the assigned network data. 12. Continue with configuring the Wagering Terminal. Page 96 of 107...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Error Messages This table is the complete list of error and status messages. The most common causes and remedies are also listed. After clearing faults, use the CREDIT RESET / AUDIT MODE SWITCH to reset the terminal. In the table below, the response “Decision”...
Page 98
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Note Validator are dirty/damaged Game Corruption The game object in Clear the NVRAM and reconfigure. If memory is corrupted or is the fault persists, call the not the same as the manufacturer (AGT) configured selection Hard Meter...
Page 99
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Opened Note Acceptor The Note Stacker has been Check the connectors, or replace Stacker Removed removed or not correctly Stacker or Note Acceptor as mated in the Note required Validator Note Stacker Full...
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Troubleshooting This table lists problems with operating the terminal. Conditions that may be remedied by actioning on-screen prompts are not included. If the terminal fault remains after carrying out the suggested remedy, consider replacement of the circuit board assemblies within the Logic Cage.
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A Monitor settings too dark. Faulty Power No display on Monitor. Save operation of Power Supply. Faulty Monitor. Faulty main board. No Sound from the terminal/No sound Speaker(s) faulty. Sound corrupted. from one side of the terminal.
985 094 – 35 Rev A Spare Parts List Note: This parts list applies only to the A560X-L Wagering Terminal and not all parts listed are available as a spare part. Please check with the Ainsworth Service Store for confirmation. Part Description Part No.
Page 103
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 014 076 BRACKET ACT DOOR COUNTER 014 079 A560 LIGHT TOWER BLANKIG PLATE 014 082 MONITOR DOOR LHS SUPPORT 014 083 MONITOR DOOR RHS SUPPORT 014 085 FASCIA SIDE CLIP SUPPORT 014 086 MONITOR DOOR TOP SUPPORT 014 087-BCH...
Page 104
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 014 116 BELLY DOOR LOCK BAR SPRING 014 118 FASCIA BOTTOM DOOR BRKT ASSY 014 126 TOP HINGE BOTTOM DOOR 014 131 COIN IN CHUTE BACK 014 132 COIN IN CHUTE FRONT 014 133 COIN OUT DEFLECTOR...
Page 105
A560X-L Service Manual Pari-Mutuel Wagering Terminal 985 094 – 35 Rev A 014 180-BCH A560 DOOR BUTTON PLUG FASCIA 014 180-BLK A560 DOOR BUTTON PLUG FASCIA 014 181 HINGE BASE BOTTOM DOOR 014 183 SUZO COIN DIVERTER 014 187 COIN TRAY BLANK SUPPORT 014 191 A560, BLANK LOYALTY PANEL 014 206...
Need help?
Do you have a question about the A560 LOWBOY and is the answer not in the manual?
Questions and answers