Using The Self-Propel Drive; Shutting Off The Engine; Engaging The Blade - Toro Super Recycler 20383 Operator's Manual

Using the Self-Propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (Figure 16).
Figure 16
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.

Shutting Off the Engine

Service Interval: Before each use or daily
To shut off the engine, press and hold the
engine-shutoff button
shuts off.
g003221
1. Engine-shutoff button
Important:
When you release the blade-control
bar, the blade should stop within 3 seconds. If it
does not stop properly, stop using your machine
immediately and contact an Authorized Service
Dealer.

Engaging the Blade

When you start your engine, the blade does not turn.
You must engage the blade to mow.
1. Pull the control-bar lock back
2. Pull the blade-control bar to the handle
19).
15
(Figure 17) until the engine
Figure 17
(Figure 18).
Figure 18
g017317
g003123
(Figure