Toro Z Master 74048TE Operator's Manual page 12

Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure 5).
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure 6).
1. Safety-interlock symbols
2. Hour meter
Safety-Interlock Indicators
There are symbols on the hour meter that indicate
with a black triangle that the interlock component is
positioned correctly (Figure
Battery-Indicator Light
If you turn the key switch to the O
few seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when the key switch is
turned on and when the charge is below the correct
operating level (Figure
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction
to F
LOW
(Figure
Figure 6
3. Battery light
6).
position for a
N
6).
(Figure
Neutral-Lock Position
Move the motion-control levers outward from the
center to the N
AST
the machine
motion-control levers into the N
when you stop the machine or leave it unattended.
Parking-Brake Lever
Whenever you shut off the engine, engage the parking
brake to prevent accidental movement of the machine.
5).
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine; refer to
Valve (page
g187133
4).
12
- position when exiting
EUTRAL LOCK
(Figure 25). Always position the
EUTRAL
Using the Fuel-Shutoff
30).
- position
LOCK