Page 2
Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
1. SAFETY INSTRUCTIONS 1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.
2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void.
pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection. 3. During Usage • This machine is for domestic use only; do not use • it for other purposes. Commercial use will void the guarantee. Do not stand, sit or place loads on the open door of the dishwasher.
Page 8
the door for one minute after it has opened. For effective drying, keep the door open for 30 minutes after a programme has ended. Do not stand in front of the door after the auto-open signal sounds. In the case of a malfunction, repair should only be performed by an authorised service company, otherwise the warranty will be void.
Page 9
CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
2. INSTALLATION WARNING: Use the new water inlet 2.1. Machine positioning hose supplied with your machine, do not use an old machine’s hose. When positioning the machine, place it in an area where dishes can be easily loaded WARNING: Run water through the and unloaded.
2.4. Electrical connection WARNING: After removing the top panel of your dishwasher, the machine should be placed in a space of the dimensions shown in WARNING: Your machine is set to the figure below. operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection.
3. TECHNICAL SPECIFICATIONS 3.2. Technical specifications 13 place Capacity settings Dimensions (mm) Height 850(mm) Width 598(mm) Depth 598(mm) Net weight 46 kg Operating 220-240V voltage / 50 Hz, frequency Total current 10(A) Total power 1900(W) Maximum: 3.1. General appearance Water supply 1 (Mpa) 1.
4. BEFORE USING THE APPLIANCE 4.1. Preparing your dishwasher for first use • Make sure the electricity and supply water specifications match the values indicated in the installation instructions for the machine. • Remove all packaging material inside the machine. •...
4.4. Test Strip Run water through Keep the strip in Set the hardness level of Shake the strip. Wait (1min.) the tap (1min.) the water (1sec) your machine. second munite munite NOTE: The factory hardness level setting is “3”. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.
Continued use of too much detergent may set too height, you can see bluish layers on cause machine damage. glass and dishes. Using little detergent can result in poor cleaning and you can see whitish 4.12. Filling the rinse-aid and setting streaksin hard water.
5. LOADING YOUR WARNING: To avoid any possible DISHWASHER injuries, place long-handle and sharp- pointed knives with their sharp points facing down or horizontally on the baskets. For best results, follow these loading guidelines. Loading the household dishwasher up to Upper Basket Highliking setting the capacity indicated by the manufacturer The upper basket includes a mechanism...
Page 17
Lower Basket Height Adjustable Rack (peg type) Two Folding Racks (12 pc) The height adjustable racks enable glasses and cups to be placed on or under The folding racks on the lower basket allow the racks. The racks can be adjusted to 2 for the placement of larger items, such as different heights.
Page 18
Upper Cutlery Basket The upper cutlery basket is designed for the placement of large and small cutlery and uten WARNING: Knives and other sharp objects must be placed horizontally in the cutlery basket. EN - 14...
Page 19
Multi-functional Rack System The multi-functional rack system is located in the lower basket. It can be used for the placement of mugs or large utensils for washing. To close the racks, fold them from position (a) to position (b). Make sure the clips on the rack fit on the wire (c).
5.2. Alternative basket loads Un chargement incorrect peut entraîner Lower basket de mauvaises performances de lavage et de séchage. Veuillez suivre les recommandations du fabricant pour obtenir un bon résultat. Note importante pour les laboratoires de test. Unsuitable items for dishwashing •...
. PROGRAMME TABLE Smart 30°C - Smart 50°C - Smart 60°C - Prewash Program Name: Quick 30' Super 50' Easy Care 60°C 50°C 60°C 70°C Standard program for Suitable to rinse Suitable for normally soiled Suitable for Suitable for Auto program for Auto program for Auto program dishes that you...
Page 22
• The program duration may change according to the amount of dishes, the water temperature, the ambient temperature and selected additional functions. • Values given for programmes other than the eco programme are indicative only. • Eco programme is suitable to clean normally soiled tableware, that for this use, it is the most efficient programme in terms of its combined energy and water consumption, and that it is used to assess compliance with the EU ecodesign legislation.
7. THE CONTROL PANEL selected programme. If you do not want to use this feature on the newly selected wash programme, press the feature button until the light on the button switches off. Press the Start/Pause button (7) to start the selected programme.The light on the Start/Pause button will switch off and the Wash light (9) will illuminate.
Press the Start/Pause When the End light button once. illuminates, the programme has been cancelled. After the End light starts to flash, the water discharge process will start and continue for 30 seconds. After the programme stops, select the desired programne using the Programme Selection button.
8. CLEANING AND To remove and clean the filter combination, turn it counter clockwise and remove it by MAINTENANCE lifting it upwards (1).Pull the coarse filter out of the micro filter (2).Then pull and remove Cleaning your dishwasher is important to the metal filter (3).Rinse the filter with lots of maintain the machine’s service life water until it is free of residue.
8.3 Drain Pump Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. Warning Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.
9. TROUBLESHOOTING FAULT POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Switch your Dishwasher on by pressing the Your Dishwasher is not switched on. On/Off button. Fuse blown. Check your indoor fuses. The programme does not start.
Page 28
FAULT POSSIBLE CAUSE TROUBLESHOOTING Use the correct amount of detergent, as Not enough detergent used. instructed in the programme table. Rinse aid dosage and/or water Increase rinse aid and/or water softener softener setting set too low. level. Whitish stains remains on dishes.
Page 29
AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE POSSIBLE FAULT WHAT TO DO CODE Make sure the water inlet tap is open and water is flowing Separate the inlet hose from the tap and clean the filter of Water inlet system failure the hose.
Page 30
PEN K INTER TRADING CO., LTD. HEAD OFFICE : 1000/63-64 PB TOWER. 16th Floor. Sukhumvit 71 Road, North Klongtan,Wattana, Bangkok 10110 TEL. 0-2493-6565 FAX : 0-2391-1141 SERVICE CENTER : 63/3 Moo 6 Soi Suksawat 76, Bangchak, Phra Pradaeng, Samut Prakan 10130 TEL.
Need help?
Do you have a question about the DI813DG and is the answer not in the manual?
Questions and answers