Advertisement
Quick Links
QWM 1932
Fixed frequency UHF wireless system
863.0 + 864.0 MHz or 863.5 + 865.0 MHz
(Channel 70)
Due to continuous product development, please ensure that you have downloaded the
latest instruction manual for this produ c t from the Q-Audio website
Telephone: (+44) (0) 203 598 5164 • Email: info@q-audio.co.uk • Web: www.q-audio.co.uk
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change. © Copyright Q-Audio. E&OE.
M
A
D
E
I
N
C
H
I
N
A
Advertisement
Related Manuals for Audio QWM 1932
Summary of Contents for Audio QWM 1932
- Page 1 Telephone: (+44) (0) 203 598 5164 • Email: info@q-audio.co.uk • Web: www.q-audio.co.uk If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal. Due to continuous product development, specifications and appearance are subject to change. © Copyright Q-Audio. E&OE.
-
Page 2: Manufacturer Declarations
Thank you for purchasing this Q-Audio product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you. - Page 3 The Q-Audio QWM 1932 HH uses one of the following UHF frequencies sets: Option A: 863.0 and 864.0MHz or option B: 863.5 and 865.0MHz. A sticker indicating which frequency set your QWM1932 HH operates on is attached to the receiver.
- Page 4 The Q-Audio QWM 1932 BP uses one of the following UHF frequencies sets: Option A: 863.0 and 864.0MHz or option B: 863.5 and 865.0MHz. A sticker indicating which frequency set your QWM1932 HH operates on is attached to the receiver.
-
Page 5: Receiver Operation
Before operating the system ensure that you have installed fresh batteries in the transmitters. Receiver operation 1. Connect audio outputs for channel A and B to your mixer/amplifier, either two balanced XLR cables for dual output or a single unbalanced 6.35mm jack cable for mixed output of both channels.
Need help?
Do you have a question about the QWM 1932 and is the answer not in the manual?
Questions and answers