Setting Up The Parental Control; Setting Up The Audio Options - Samsung DVD-M405 User Manual

M405(Au-ENG) 3/9/01 8:43 PM Page 32

Setting Up the Parental Control

The Parental Control function works in conjunction with DVDs that have been assigned a
rating - which helps you control the types of DVDs that your family watches. There are up
to 8 rating levels on a disc.
1
1
With the unit in Stop mode, press SETUP button.
The Setup Menu screen appears.
2 Use UP/DOWN to select Parental. Press ENTER.
2
The Parental Control screen appears.
3 Use LEFT/RIGHT to select Yes if you want to use
3
a password. Press ENTER. The Enter Password
screen appears.
Enter your password. The Re-enter Password
4
4
screen appears to confirm the password. Enter
your password again. The Parental Control
screen appears.
5 About the Rating Level ;
5
The Rating Level will work only when Use
Password is set to Yes. To unlock the player,
use LEFT/RIGHT to select No. Use UP/DOWN
to select Rating level. Press ENTER.
- Use UP/DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use LEFT/RIGHT to select No
in Use Password.
About the Change Password ;
6
6
- Use UP/DOWN to select Change Password. The Change
Password screen appears.
- Enter your new password. Re-enter the new password
again.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.
32
PARENTAL CONTROL
1 Use Password No
RETURN ENTER
CREATE PASSWORD
Enter Password
RETURN PRESS 0-9
PARENTAL CONTROL
1 Use Password Yes
2 Rating Level 1
3 Change Password
RETURN ENTER
e.g Setting up in LEVEL6.
RATING LEVEL
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Klds Safe
RETURN ENTER

Setting Up the Audio Options

1
1 With the unit in Stop mode, press the SETUP but-
ton.
2
2 Use the UP/DOWN buttons to select AUDIO OPTIONS.
Then press the ENTER button.
3
3 Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
Dolby Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
N N N N O O O O T T T T E E E E : Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2. Off : Doesn't output digital signal.
2X Scan Audio
1. On : Turns 2X audio on.
2. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Certain audio features of this product manufactured under a license from Deeper Products, Inc.
®
Spatializer and circle-in-square device are trademarks owned by Deeper Products, Inc.
• Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
AUDIO OPTIONS
1 Dolby Digital Out PCM
2 MPEG-2 Digital Out PCM
3 DTS Off
4 Dynamic Compression On
5 2X Scan Audio Off
6 Speaker
RETURN
MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the Digital
Audio Output.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
Speaker
33