Advertisement
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
WARNING:
Keep all objects at least 1 metre from the front, sides and
rear of the appliance
IMPORTANT! NEVER COVER THIS APPLIANCE!
Place the fan on a dry, level and sturdy surface.
Ensure the fan speed control is on the OFF position before plugging the power cord into the
socket.
To operate the fan turn speed control dial clockwise until desired wind speed is achieved.
Fan control switch
The control switch positions are:
0 - Off
1 - Low speed
2 - Medium Speed
3 - High Speed
To activate the oscillation function, push down the oscillation pin on the top of the motor. The
fan will then oscillate until the pin is pulled back up.
Adjust tilt by turning neck screw and tilting body to the desired wind direction
(i.e. either upward or downward).
Advertisement
