MLR5011 User Manual
HOW TO USE THE LASER PRESENTER
1. Insert the receiver into the USB port.
2. Your operation system will start to install the receiver
automatically .And you can see the information as below display in
your computer.
3. In Win98/Me operation system you need to follow the instructions on
your screen .During the install process , the O/S may ask you to put
Win98 CD into the CD-ROM .
4. After the install process finished ,the presenter will be working .
5. Press "Function button" to change mouse mode or PowerPoint mode.
Left Button
Right Button
Better than other competition:
1. 16 direction and 3 level speed precise control.
2. RF (315 or 433 or 900MHZ) Any angle ,up to 7 Meters.
3. 256 ID and RF-technique to Anti-interference .
4. No matter what PC Off or Battery Out ,The ID will not be lose.
5. Add PowerPoint Mode .
Function Button
Notice:
If the precenter is not working :
1. Maybe no power , please check your battery .
2. Maybe different ID ,please link ID.
(1).push the button on Receiver.
(2).press "left button" + "right button" within 10 SEC .
Mouse Mode
Mouse Left Button
Mouse Right Button
PowerPoint Mode
Page Down
Page Up
Need help?
Do you have a question about the MLR5011 and is the answer not in the manual?
Questions and answers