Controlling A Tv With The Remote - Samsung DVD-HD936 User Manual

00168V-HD936(GB)-2 8/21/03 11:04 AM

Controlling a TV with the Remote

The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
CODE BRAND
01 SAMSUNG_4
02 SAMSUNG_6, LG, LOEWE, PHILIPS,
FINLUX, YOKO, LOEWE OPTA,
MITSUBISHI, PHONOLA, RADIOLA,
SCHNEIDER
03 SAMSUNG_1
04 SAMSUNG_2
05 SAMSUNG_3
06 SAMSUNG_5
07 TOSHIBA
08 PANASONIC_4
09 GRUNDIG, BLAUPUNKT, SIEMENS
10 SHARP
11 HITACHI
12 SANYO, AKAI, FISHER
13 HITACHI, SABA, THOMSON, NORDMENDE
14 HITACHI, NORDMENDE, SABA,
TELEFUNKEN, THOMSON, BRANDT,
FERGUSON, PIONEER, TELEAVA
15 SONY
16 TOSHIBA, SANYO, SHARP, SONY,
MITSUBISHI
17 TOSHIBA, GRUNDIG, FINLUX
18 TOSHIBA
1
Turn on the TV.
2
Point the DVD's remote at the TV.
3
While holding the TV POWER button
down, enter the code for your brand.
e.g) For SAMSUNG 4 TVs
While holding down the TV POWER button,
enter 0 and then 1.
46
Page 46
TV Codes
CODE BRAND
19 TOSHIBA
20 PHILIPS, PHONOLA, RADIOLA
21 TOSHIBA, GRUNDIG, CGE,
IMPERIAL, MIVAR
22 PHILIPS, SABA, BANG&OLUFSEN,
BRIONVEGA, FINLUX,
FORMENTI, LOEWE OPTA, METZ,
WEGA, PHONOLA, RADIOMARELLI,
SINGER, SINUDYNE
23 NOKIA, PANASONIC, SABA, PIONEER,
REZ, SELECO, SALORA
24 HITACHI, NORDMENDE, PANASONIC,
SABA,TELEFUNKEN, THOMSON,
CONTINENTAL, EDISON
25 PANASONIC_2
26 PANASONIC_3
27 PANASONIC_6
28 TELEFUNKEN
29 MIVAL
30 LG_2
31 SHARP_2
32 JVC
33 THOMSON ASIA
34 THOMSON ASIA
4
If the TV turns off, setup is complete.
Enter other codes of the same brand
if the first code does not work.
5
To operate the TV, use the "TV Function
Buttons" described on page 11.
NOTE
The remote may not be able to control every model
TV of the brands listed.
Before requesting service (troubleshooting), please check the following.
Problem
• Check the batteries in the remote. May need replacing.
No operations can be
• Operate the remote control at a distance of no more than 20 feet.
performed with remote.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
• Ensure that the disc is installed with the label side facing up.
Disc does not play.
• Check the region number of the DVD.
5.1 channel sound is not • 5.1 channel sound is reproduced only when the following conditions
being reproduced.
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "Dolby 5.1 ch" mark
on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
The icon appears on • The features or action cannot be completed at this time because:
1. The DVD's software restricts it.
screen.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is
out of range.
Disc Menu doesn't appear.
• Check if the disc has a Menu.
Play mode differs from the
• Some of the functions selected in the Setup Menu may not work
Setup Menu selection.
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot
• The Screen Ratio is fixed on your DVDs.
be changed.
• Make sure you have selected the correct Digital Output in the Audio
No audio.
Options Menu.
• Press power on from a cold start with no disc in the unit. Press the
Forgot password
STOP ( ) and PLAY (
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.
• Go to the contents and find the section of the instruction book that
If you experience other
contains the explanations regarding the current problem, and follow
problems.
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
Troubleshooting
Action
Page
P4
P7
P12
P41
P18
P38~44
P42~43
P41
) buttons simultaneously on the front panel
P44
47