AmazonBasics B01M0A4B9M Manual page 11

Assembly
Step 8:
Setting Up the Product
A
E
B
• Put the last shelf
plastic sleeves . Place cardboard over the corners of each shelf and gently tap
E
down with a rubber mallet (or similar tool) until the shelf is level.
• To improve stability (if needed), drill two tiny holes (Ø 4 mm) into the wall and
insert the dowels
Restraint hardware. The full instructions are inside the hardware bags.
Please read the instructions and install the tipping restraint. The shelf is now
sec
onto the poles and lower it down until it rests on the
A B
. Secure the shelf to the wall by installing the Furniture Tipping
G
Wall
G
11