Parts Description - Makita DUC305 Instruction Manual

Cordless chain saw
Hide thumbs Also See for DUC305:
Table of Contents

Advertisement

Available languages

Available languages

For preparation of the item being shipped, consulting an
expert for hazardous material is required. Please also
observe possibly more detailed national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
When disposing the battery cartridge, remove
11.
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12. Use the batteries only with the products
specified by Makita. Installing the batteries to
non-compliant products may result in a fire, exces-
sive heat, explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
SAVE THESE INSTRUCTIONS.

PARTS DESCRIPTION

1
6
16
17
1
Battery cartridge
4
Saw chain
7
Check button
10
Main power switch
13
Switch trigger
16
Box wrench
19
Guide bar cover
5
18
2
Front hand guard
5
Retaining nut
8
Capacity indicator
11
Lock-off lever
14
Front handle
17
Chain catcher
-
-
7 ENGLISH
CAUTION:
Only use genuine Makita batteries. Use
of non-genuine Makita batteries, or batteries that have been
altered, may result in the battery bursting causing fires,
personal injury and damage. It will also void the Makita
warranty for the Makita tool and charger.
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely dis-
charged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
2.
Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
Charge the battery cartridge with room temperature
3.
at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery
cartridge cool down before charging it.
Charge the battery cartridge if you do not use
4.
it for a long period (more than six months).
2
3
4
15
12
15
18
7
8
14
19
3
Guide bar
6
Chain adjusting screw
9
Main power lamp
Rear handle
Oil tank cap
Adjusting screw (for oil pump)
-
-
9
10
11
12
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Duc355Duc405

Table of Contents