Download
Share
Print this page
  1. Manuals
  2. Brands
  3. MESANOVIC Manuals
  4. Speakers
  5. CDM65
  6. User manual

MESANOVIC CDM65 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
CDM65 Studio Monitor
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the CDM65 and is the answer not in the manual?

Questions and answers

Related Manuals for MESANOVIC CDM65

Summary of Contents for MESANOVIC CDM65

  • Page 1 CDM65 Studio Monitor User Manual...

  • Page 2: Table Of Contents

    CDM65 User Manual Contents Safety and Warnings Unboxing Daily Use and Positioning Uploading Different Tunings Setting Up the Stereo Hub Warranty and Registration Measurements 10,11,12...

  • Page 3: Safety And Warnings

    Warnings: -Do not remove the rear amplifier panel unless instructed by Mesanovic to do so for any on site trouble shooting or repair work. For any issues, please contact Mesanovic for further help and instructions.

  • Page 4: Unboxing

    Unboxing The CDM65 is packaged as an individual speaker. The speaker is fairly heavy and care must be taken when unboxing and positioning the speakers. To remove the speaker from the carton safely follow these steps: 1) Cut the tape at the top of the box and then lay the box on its side.

  • Page 5: Daily Use And Positioning

    Wake-up time is around 8 seconds. Positioning: We recommend using the CDM65 at a distance of 3-6 feet in an equilateral triangle with the face of the cabinets facing towards the listener. The speakers are designed to give a flat frequency response with your ear height at the center point between the tweeters and midrange driver.

  • Page 6: Uploading Different Tunings

    DSP processing that takes place in the Stereo Hub – this does not affect the tuning of the speaker itself. The room correction and manual eq with the Mesanovic App only works with the Stereo Hub when you are wirelessly streaming to the speakers using WiSA –...

  • Page 7: Setting Up The Stereo Hub

    • When done, the Stereo Hub should be connected to your network and the front LED will be solid white. • You can now proceed to download the Mesanovic App from the iOS App Store if you wish to do so. Otherwise, proceed with the rest of the set-up instructions below.
  • Page 8 • Make sure your speakers and stereo hub are powered on. • Press and hold the pairing button found on the rear amplifier plate of the CDM65 for 3 seconds until it starts to blink. Once blinking, the speaker is in active pairing mode.

  • Page 9: Warranty And Registration

    Please note: We will only honor the warranty for the Stereo Hub if it was • purchased for use with the CDM65 monitors. If the Stereo Hub was purchased for use with other WiSA certified speakers there will be no technical or warranty support provided.

  • Page 10: Measurements

    Measurements...