Samsung SGH-ZX10 Series User Manual page 218

•
Restore: restores the default settings of the profile.
5. Using the Up or Down Navigation key, highlight Edit and
press the Select soft key or the
For each profile, the following options are available:
•
Set Name: enter a name that you wish to assign to the HTTP
or WAP proxy server.
•
Access Name: enter the access server name.
•
Auth Type: select a connection type.
•
User ID: enter the User ID required to connect to the
network.
•
Password: enter the password required to connect to the
network.
•
Protocol: select a web page format. Select HTTP or WAP.
•
Home URL: enter the address of your startup homepage.
When the default homepage displays, you can delete it by
pressing and holding the
•
Proxy Address: enter the WAP gateway IP address required
to connect to the Internet.
•
Port: enter the Proxy port required to connect to the Internet.
•
Linger Time (Sec.): allows you to enter a time that will
disconnect the WAP browser when there is no activity.
•
Advance Settings: allows you to enable and enter the server
Static IP address, Static DNS address and select a Traffic
Class.
Note: The WAP settings may vary depending on the service provider.
6. When you have finished editing the profile, press the
Save soft key or the
218
key.
key.
key to save your changes.