Summary of Contents for domi LNCF0544
- Page 1 160 US GAL Metal Deck Box ASSEMBLY MANUAL SKU：LNCF0544 Missing part? Damaged? Contact us via email at domiservice01@outlook.com © Copyright 2022-2024 domi LLC. I All Rights Reserved.
-
Page 2: Before Starting Assembly
BEFORE STARTING ASSEMBLY ① Some parts have metal edges. Please be careful when handling components. Always wear work gloves. ② Please check all parts and components to ensure that there are no damages or missing items BEFORE starting the construction of the product. - Page 3 Please do not fully tighten the bolts prior to complete assembly. ！...
- Page 4 (1) Place part #C on part #A, align the screw holes, and secure with 4 bolts #X3. (2) Repeat the above procedure to assemble the other side. St4x16 Step 1: Place 2 part #D on part #A, align the screw holes, and secure with 9 bolt #X3.
- Page 5 (1) Insert 4 part #L into the 4 corners of the deck box and secure with 8 bolt #X3. St4x16 Outside...
- Page 6 St4x8 Step 1: Place part #H on the storage panel #E & #F as shown, align the screw holes, and secure with 9 gaskets and bolts #X2. Step 2: Place part #I on the storage panel #D as shown, align the screw holes, and secure with 9 gaskets and bolts #X2.
- Page 7 Place 4 part #M on the inside of the M4x10 box frame, secure with 8 gaskets and bolts #X1 as shown. St4x16 Cover 4 part #N on the corner of the box, secure with 8 bolt #X3 as shown.
- Page 8 St5x16 Step 1: Connect part #P and part #Q. Step 2: Use bolt #Y to secure them to the storage panel. Use bolt #W2 and gasket #T M6x25 to secure part #V on the storage panel as shown. M4x10 Place part #B on the storage panel #E & #F, align the screw holes, and secure with 6 gaskets and bolts #X1 as shown.
- Page 9 M6x16 (1) Use bolt #W1 and nut #U to connect part #V with the bracket under the lid. Tighten all the bolts. ！ (1) Use gasket and bolt #X1 to fix part #R to the lid as shown. M4x10 St4x8 (2) Use gasket and bolt #X2 to fix part #S to the storage frame as shown.
-
Page 11: Care And Safety
CARE & SAFETY It is of utmost importance to assemble all of the parts according to the directions. Do not skip any step. Wear safety goggles and always follow the manufacturer's instructions when using power tools. Hot items such as recently used grills, blowtorches, etc., must not be stored in the box.
Need help?
Do you have a question about the LNCF0544 and is the answer not in the manual?
Questions and answers
I am looking to get some struts for the lid of a couple of your boxes. do you possibly know where I can purchase them?