Table of Contents
Advertisement
Receiving data via Bluetooth
To receive data via Bluetooth, your phone's
Bluetooth feature must be active and its
visibility must be enabled.
1. If an unauthorised Bluetooth device
sends data to your phone, press <Yes>
to allow the device to access your phone.
2. Press <Yes> to receive data.
Security
(Menu 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and USIM/SIM
card.
If you enter an incorrect PIN/PIN2 three
times, the USIM/SIM card is blocked. To
unblock it you need to enter your PUK/PUK2
(Personal Unblocking Key). The codes are
supplied by your service provider.
Phone lock
(Menu 9.8.1)
Use this menu to protect the phone from
unauthorised use. When this feature is
enabled, you must enter a 4- to 8-digit
phone password each time the phone is
switched on.
The password is preset to 00000000. To
change the password, use the Change
phone password menu.
SIM lock
(Menu 9.8.2)
This menu allows your phone to work only
with the current USIM/SIM by assigning a
SIM lock code. You must enter the SIM lock
code to use a different USIM/SIM card.
PIN lock
(Menu 9.8.3)
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card
against unauthorised use. When this feature
is enabled, the phone requires your PIN each
time it is switched on.
Fixed dialling mode
If supported by your USIM/SIM card, Fixed
Dialling Number (FDN) mode restricts your
outgoing calls to a limited set of phone
numbers. When this feature is enabled, you
can make calls only to phone numbers
stored on the USIM/SIM card.
(Menu 9.8.4)
99
Advertisement
Table of Contents
