Saitek ZMF II Manual

ZMF II / ZMF Pro
1. Start/Stop. ON/OFF slider is at the top of the clock
2. Enter edit mode. Hold center button down for 5 seconds till
display flashes
In edit mode
a) The digit to be modified will blink on the display.
b) The Right play button will increase the blinking value.
c) Use the center button to set and advance
d) Press the check to move to the next setting

3. Set time

a. Press the right button till you see INC 00 (increment).
Both will blink
b. Press center button to SELECT and make just 00 blink
c. Press right button to set INC to 5. Then press select to
fix.
d. Press left button till you get to HH:MM HH:MM.
e. Press center button to edit
f. Change each value by using the right/left button to
increase/decrease to 1:30 (or alternate time control)
and press select to fix and move forward
g. Press select when all times are set
4. Exit edit mode: Edit mode will be automatically exited when
the time is set.
5. Play by pressing one of the player buttons
V. Krishnamurthy
The Left play button will decrease the blinking value.
Page 1 of 2 2023-06-15