Summary of Contents for Quantifi Photonics PASSIVE Series
Page 1
PASSIVE Series Passive Component Integration PXIE USER MANUAL quantifiphotonics.com...
Page 2
Information provided by Quantifi Photonics is believed to be accurate and reliable. However, no responsibility is assumed by Quantifi Photonics for its use nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent rights of Quantifi Photonics.
3.1.10 PASSIVE-1018 3.1.11 PASSIVE-1019 3.1.12 PASSIVE-1020 3.1.13 PASSIVE-1021 3.1.14 PASSIVE-1022 3.1.15 PASSIVE-1023 3.1.16 PASSIVE-1301 3.1.17 PASSIVE-1303 3.1.18 PASSIVE-1304 3.1.19 PASSIVE-1305 3.1.20 PASSIVE-1306 4 Setting up hardware 3 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
Page 4
8 Technical Support 8.1 Contacting the Technical Support Group 8.2 Transportation 9 Warranty Information 9.1 General information 9.2 Liability 9.3 Exclusions 9.4 Certification 9.5 Service and repairs 4 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or component damage. Do not proceed unless the required conditions are met and understood. NOTE Indicates relevant information that requires your attention. 5 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
2.1 Optical laser radiation precautions CAUTION The use of controls, adjustments, and procedures other than those specified in this document may result in exposure to hazardous situations involving optical radiation. 6 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE Series PXIe module is a highly customizable PXIe module that can integrate the passive components of your choice. The PASSIVE Series PXIe can be customized to a wide range of passive components: WDM couplers, splitters, circulators, band-pass filters, PM beam splitters, MUX, DeMUX and more.
3.1.1 PASSIVE-1001 The PASSIVE-1001 is a 1310 ± 80 nm, 1×2 (50/50) splitter, that equally splits the optical power of the input port into two output ports. 8 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1002 is a 1-slot, 1260 to 1650 nm, 1×4 (25/25/25/25) splitter module, that equally splits the optical power of the input port into four output ports. 9 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
3.1.3 PASSIVE-1006 The PASSIVE-1006 is a 1-slot, CWDM4 MUX module, which combines 4 different fibers each carrying a different wavelength into a single fiber. 10 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1007 is a 1-slot, CWDM4 DeMUX module, which separates one optical fiber carrying 4 WDM channels into 4 different fibers each carrying a different wavelength. 11 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1008 is a 1-slot, single-mode, 1550 ± 80 nm, 1×2 (50/50) splitter module, that equally splits the optical power of the input port into two output ports. 12 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
3.1.6 PASSIVE-1009 The PASSIVE-1009 is a 1-slot, 1550 nm optical circulator that transmits the incoming signal as follows: 13 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
3.1.7 PASSIVE-1010 The PASSIVE-1010 is a 2-slot, 1310nm, 1×8 splitter module, that equally splits the optical power of the input port into eight output ports. 14 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1016 is a 1-slot, WDM bi-directional MUX/DEMUX device, which combines 4 different fibers each carrying a different wavelength into a single fiber. C34 = 1550.116 nm, C42 = 1543.730 nm, C50 = 1537.397 nm, C58 = 1531.116 nm. 15 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1017 is a 1-slot, single-mode, 1550 nm, 1×2 (90/10) splitter module, that splits the optical power of the input port into two output ports; one containing 90% of the input signal power, the other containing 10% of the input signal power. 16 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1018 is a 2-slot, passive 12-way breakout module. It enables breaking out a high-density MTP-12 connector (Elite Male, Key up) into 12 SC/APC connectors in single-mode fiber. 17 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1019 is a 1-slot, 1310 nm, 1×2 (90/10) splitter module, that splits the optical power of the input port into two output ports; one containing 90% of the input signal power, the other containing 10% of the input signal power. 18 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1020 is a 1-slot, bi-directional 1x8 WDM MUX/DEMUX module, which separates one optical fiber carrying 8 WDM channels into 8 different fibers each carrying a different wavelength. 19 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
3.1.13 PASSIVE-1021 The PASSIVE-1021 is a 2-slot 4-channel attenuator with a fixed attenuation level of 1dB. 20 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
3.1.14 PASSIVE-1022 The PASSIVE-1022 is a 2-slot 4-channel attenuator with a fixed attenuation level of 2dB. 21 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
3.1.15 PASSIVE-1023 The PASSIVE-1023 Is a 2-slot 4-channel attenuator with a fixed attenuation level of 3dB. 22 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
3.1.16 PASSIVE-1301 The PASSIVE-1301 is a 1-slot, 1310 nm, 1×2 (50/50) splitter module, that equally splits the optical power of the input port into two output ports. 23 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1303 is a 1-slot, bi-directional 1x8 polarization maintaining WDM MUX/DEMUX module, which separates one optical fiber carrying 8 WDM channels into 8 different fibers each carrying a different wavelength. 24 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1304 is a 1-slot, 1310 nm, 1×8 polarization maintaining splitter module, that equally splits the optical power of the input port into eight output ports. 25 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1305 is a 1-slot, 1310 nm polarization maintaining 2×2 fused fiber optic coupler module, that evenly splits the optical power of two input ports into two output ports. 26 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The PASSIVE-1306 is a 1-slot, 1310 nm polarization maintaining 1×4 splitter module, that equally splits the optical power of the input port into four output ports. 27 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
Ensure that the chassis being used supports PXIe (or contains PXI-hybrid compatible slots). If you are unsure if your chassis is compatible with your Quantifi Photonics product, please contact Quantifi Photonics Customer Support. Make sure to follow these instructions when installing or removing a Quantifi Photonics module from a PXIe chassis. CAUTION The product is sensitive to electrostatic discharge (ESD).
Push module into slot until you feel Engage the fastening clip. Secure all Power the chassis ON. resistance from the backplane connection. fastening screws. 29 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
Use the fastening clip to pull. Do NOT pull on the connectors. Store the module in its antistatic bag. Power ON the chassis. 30 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
Always inspect fiber end faces for cleanliness using a fiber inspection probe before inserting them into a port.. If required, clean fibers and faces as detailed below. Quantifi Photonics is not responsible for damage or errors caused by bad fiber cleaning or handling. NOTE To avoid damaging ferrules or fiber faces due to mismatched connectors, always check ports and connector type information before inserting a connector.
Page 32
If your connector features a screw sleeve, tighten the connector to firmly maintain the fiber in place. Do not over-tighten, as this will dam- age the fiber and the port bulkhead. NOTE Failing to align and/or connect fiber-optic cables properly will result in significant signal loss and reflection. 32 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
Quantifi Photonics MATRIQ / EPIQ instruments Google Chrome™ Supported browsers for working with CohesionUI Microsoft Edge® Recommended client computer operating system Microsoft Windows® 10 (64-bit) 33 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
The use of controls, adjustments, and procedures other than those specified herein may result in exposure to hazardous situations or impair the protection provided by this unit. 34 / 38 Quantifi Photonics | PASSIVE Series PXIe User Manual | Version 2.00...
8 Technical Support 8.1 Contacting the Technical Support Group To obtain after-sales service or technical support for this product, contact Quantifi Photonics: support@quantifiphotonics.com To accelerate the process, please provide information such as the name and the serial number (see the product identification label), as well as a description of your problem.
9.2 Liability Quantifi Photonics shall not be liable for damages resulting from the use of the product, nor shall be responsible for any failure in the performance of other items to which theproduct is connected or the operation of any system of which the product may be a part.
Quantifi Photonics. 9.4 Certification Quantifi Photonics certifies that this equipment met its published specifications at the time of shipment from the factory. 9.5 Service and repairs To send any equipment for service, repair or calibration please contact the Technical Support Group: support@quantifiphotonics.com.
Page 38
Measure. Solve. Quantifi Photonics is transforming the world of photonics test and measurement. Our portfolio of optical and electrical test instruments is rapidly expanding to meet the needs of engineers and scientists around the globe. From enabling ground- breaking experiments to driving highly efficient production testing, you'll find us working with customers to solve complex problems with optimal solutions.