Unpacking; Assembly; Install Button-Style Handle - Simpson 7108644 Use And Care Manual

Follow the steps outlined in this section to unpack and assemble your pressure washer.
If you have any questions regarding the unpacking or assembly of your pressure washer,
please have your model number and serial number ready, then contact customer support at
1-877-362-4271 or email cservice@fna-group.com.
1. Place the shipping carton on a solid, flat surface.
2. Carefully cut the top of the carton open.
3. Carefully cut each corner of the carton from top to bottom.
4. Lay each side of the carton flat on the ground.
5. Remove the contents of the carton.

Install button-style handle

1). Slide the handle (1) onto the frame (2).
2). Using your thumbs, push the buttons
in (3) then slide the handle down until the
buttons pop out locking the handle.
3). Hold the gun holder (4) to the handle.
4). Secure the gun holder with the enclosed
bolt (5) and knob (6).
Page 6

UNPACKING

ASSEMBLY

5
3
2
1 4 6
3