Table of Contents
Advertisement
Menu functions
Melody composer
Use this menu to compose your own melodies using a
variety of musical components. You can set one of
your melodies as your call ringer.
Compose melody
(Menu 6.7.1)
When you access the Compose melody menu, a
stave screen displays with a selection point at the first
note position (Do).
Creating a melody
1. Move the selection point up or down by pressing
[Up] or [Down].
2. Press <Input>.
3. Select a note or rest.
4. Repeat steps 1 to 3 to add more notes and rests.
5. When you have finished, press <Options> and
select Save.
6. Enter a melody name and press <OK>.
44
(Menu 6.7)
Editing a melody
While composing a melody or after opening a saved
melody, you can edit it.
1. To change an entered note or rest, move the
selection point by pressing [Left] or [Right].
2. Change the position of the note or type of the note
or rest the same as you would when inserting it.
3. Press [ ] or [ ] to move a note to the next
semitone higher position or lower position.
You can access the following options by pressing
<Options>:
•
Range: select more than one note or rest. The
selected ones are indicated in yellow.
•
Copy: copy the note or rest.
•
Cut: cut the note or rest.
•
Paste: paste the note or rest.
•
Change: change the note or rest.
•
Delete: delete the note or rest.
•
Play: play back the current melody.
4. After editing, press [Right] until the selection point
moves to an input position.
Advertisement
Table of Contents
