Integrity 90092 Assembly Instructions And User Manual

Assembly Instructions and User Guide
Thank you for choosing the Integrity Mobility Solutions Static Shower Chair. This user guide should be read
carefully before use as it contains important information about the products safe operation and
maintenance.
WARNING: Max User Weight: 165kg (26st)
This product has been designed specifically for use in a shower. It comes complete with a heavy duty plastic
seat with perforations to allow water to flow through easily. There a arms provided to provide additional
support. This chair is designed as a temporary seating aid and should not be used as a step or transfer device.
This chair is suitable for use in showers, bathrooms & wet rooms. It is not suitable for use in swimming pools.
Assembly Instructions
• Carefully unpack and examine the product to ensure it is complete.
• Before use, check for any signs of damage e.g. cracked weld, flaking of paint, cracked or damaged seat or
bent tube. If you spot any of these issues, please contact your local Medequip office and refrain from using
the product.
• The seat must be securely screwed into the frame using the screws provided prior to being used.
• The frame is labelled "front" and "back" to show the correct orientation. (The higher cross bar positioned at
the front)
Do Not Attempt To Use If Product Is Damaged.
Integrity Mobility Solutions Ltd 74, St. Georges Road, Bolton, Greater Manchester, BL1 2DD
Static Shower Chair – 90092
1249 760582 website: www.integritymobilitysolutions.com
Tel: +44 (0)
Product Details and Dimensions
Width
Depth
Height
Seat Width
Seat Depth
Seat Height
Width Between Arms
Maximum User Weight
540 mm
500 mm
810 - 910 mm
445 mm
370 mm
490 - 590 mm
485 mm
165 kg (26st)