Table of Contents
Advertisement
Quick Links
1/3 HP Air Mover
with Power Outlets and Timer
Owner's Manual
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Item #79032
READ & SAVE THESE INSTRUCTIONS
Advertisement
Table of Contents
Summary of Contents for Ironton 79032
- Page 1 Power Outlets and Timer Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #79032 READ & SAVE THESE INSTRUCTIONS...
- Page 2 Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code (if applicable): _____________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
-
Page 3: Table Of Contents
Table of Contents Intended Use ............................4 Packaging Contents ..........................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Specific Operation Warnings ....................... 6 Grounding .............................. 7 Before Each Use ............................ 7 Operating Instructions .......................... 8 After Each Use ............................8 Maintenance ............................ -
Page 4: Intended Use
Intended Use The Ironton 1/3 HP Air Mover is intended to move air to dry floors, walls, furniture, and other areas. It’s durable and easy to operate with a static pressure and airflow balance making it ideal for a variety of applications. - Page 5 this equipment for a purpose for which it was not intended. • Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury.
-
Page 6: Specific Operation Warnings
and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. • Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with the power switch is dangerous and must be repaired by an authorized service representative before using. -
Page 7: Grounding
Grounding ⚠WARNING • This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. -
Page 8: Operating Instructions
This air mover is shipped ready-to-use. Prior to plugging the unit into the power source, completely inspect it for any shipping damage. Operating Instructions Plug the electrical cord into the power outlet. To reduce the risk of electric shock, connect only to an outlet provided with a Ground Fault Circuit Interrupter device. -
Page 9: Troubleshooting
Maintain the air mover by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. -
Page 10: Parts Diagram
Parts Diagram Parts List Reference Part Description Availability Quantity Number Left Housing Grid Cover (motor side) Timer and Switch Plate Switch Knob Timer Knob Switch Timer Motor Right Housing Power Cord Grid Cover (fan side) Air Outlet Grid Cover Kick Stand Rubber Feet (not shown) Screws and Nuts (not shown) Capacitor... -
Page 11: Limited Warranty
Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. - Page 12 Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 12 of 12...
Need help?
Do you have a question about the 79032 and is the answer not in the manual?
Questions and answers