Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for FilterQueen FQSVBO
- Page 1 FilterQueen® CORDLESS STICK VACUUM FQSVBO...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS PRIOR TO USING THIS APPLIANCE. WARNING: to reduce the risk of fire, electric shock or injury: • Check that the voltage indicated on the electrical plug corresponds with that of the local network before connecting the battery to the main power supply. •... -
Page 3: Product Parts List
INPUT 100-240V OUTPUT 27VDC, 500mA POWER 180W BATTERY CAPACITY 2600mAh PRODUCT PARTS LIST Wall Bracket Filter 2-in-1 Brush Power Adapter Crevice Nozzle Main Power Unit Electric Floor Brush Adjustable Wand... - Page 4 GET TO KNOW YOUR STICK VACUUM HEPA and Metal Filter Dust Collector Opening Button Adjustable Wand Release Button Length Adjustment Button Attachment Release Button Roller Brush Release Button Roller Brush LED Headlights...
- Page 5 GET TO KNOW YOUR STICK VACUUM LED Display Battery Release Button Power On/Off Button Charging Port Dust Collector Opening Button Wall Mount Fixing Dust Collector Bin Release Button...
- Page 6 ASSEMBLY Attach different accessories for different tasks as illustrated. click click click click...
- Page 7 OPERATING Before use, make sure that: 1. There is sufficient power. 2. The dust collector and filters have been cleaned, dried and are in place. Press the power button. Press suction strength button to switch suction level. Turn vacuum power head for Insert the crevice tool to clean in hard to reach places.
- Page 8 EMPTYING DUST COLLECTOR Opening button 1. Hold vacuum base, press the 2. Click bottom into place once dust collector opening button while emptying is complete. over a garbage can. REMOVING DUST COLLECTOR Release button 1. Hold vacuum base, twist the dust 2.
- Page 9 DUST COLLECTOR & FILTER CLEANING 1. Take out HEPA washable filter 2. Clean filters with warm water and the metal filter from the dust and mild dish soap. collector. 3. Air dry the washable HEPA 4. Clean dust collector with damp filter and metal filter until they are cloth and mild soap.
- Page 10 ROLLER BRUSH CLEANING Make sure electric floor brush attachment is detached from the wand. Do not use sharp tools when cleaning the roller brush to avoid damage. Release button 1. Press release button on the 2. Remove the rolling brush. side of the electric floor brush to release rolling brush.
-
Page 11: Wall Mounting
WALL MOUNTING 1. Measure the distance between 2. Drill two holes as measured into the bracket holes. the wall. Secure the backplate using the screws provided. 3. Align the vacuum cleaner at the raised point of the bracket and hang. The package contains adhesive pads that can be used to install the bracket. -
Page 12: Battery Charging
BATTERY CHARGING Whole Machine Charging Unplug the power adapter once fully charged. Plug power adapter into main unit. Charge Battery Separately Remove battery and charge. Unplug the power adapter once fully charged. Battery Release Button 1. Press battery release button 2. -
Page 13: Troubleshooting
TROUBLESHOOTING PROBLEM SOLUTION Make sure vacuum has power. Push charger securely into electrical outlet, try Vacuum cleaner another outlet or check circuit breaker. does not work. Product suction may be blocked - empty dust collector. Make sure charger is securely inserted into electrical outlet. -
Page 14: Warranty
Keep the original sales receipt for proof of purchase to attain warranty provisions. • Up to 90 days from the date of purchase, FilterQueen will repair or replace, on its own accord, any FilterQueen® Cordless Stick Vacuum or parts found to be defective. This warranty does not cover any shipping or handling charges which may incur. - Page 15 Health-Mor, Inc. 1 American Road, Suite 1250, Brooklyn, OH 44144 440-846-7800 | www.filterqueen.com...
Need help?
Do you have a question about the FQSVBO and is the answer not in the manual?
Questions and answers