Advertisement
U s e r M a n u a l
CAM-MB12-AD
APPLICATION:
A-Class
(W176)
C-Class
(W204)
CL
(C216)
CLS
(W219/8)
R-Class
(V251)
SLK
(R172)
SLK
(R172 Facelift)
Viano
(W639)
Allows for the addition of an aftermarket reverse camera to the original vehicle
screen. This harness works with vehicles that feature Audio20/Command radios.
Note: the camera being paired with this product must be NTSC. Ensure rear
view camera functionality is activate prior to installation. For activation, see
your nearest Mercedes-Benz dealership/service centre.
DISCLAIMER:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
The place of installation must be free of moisture and away from heat sources. Please
ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Reverse Camera Add On Interface
For select Mercedes-Benz vehicles
2013 - 2018 B-Class
2007 - 2014 C-Class
2007 - 2013 CLC
2005 - 2018 E-Class
2006 - 2012 GL-Class
2011 - 2020 M-Class
2009 - 2011 Sprinter
2004 - 2014 Vito
2012 - 2018
(W246)
2014 - 2019
(W205)
2008 - 2011
(CL203)
2002 - 2016
(W211/2)
2006 - 2012
(X164)
2005 - 2019
(W164/6)
2007 - 2018
(B232)
2003 - 2014
(W639)
Advertisement
Table of Contents
Summary of Contents for Connects2Vision CAM-MB12-AD
- Page 1 U s e r M a n u a l CAM-MB12-AD Reverse Camera Add On Interface For select Mercedes-Benz vehicles APPLICATION: A-Class 2013 - 2018 B-Class 2012 - 2018 (W176) (W246) C-Class 2007 - 2014 C-Class 2014 - 2019 (W204)
- Page 2 1. Remove the vehicles head unit by following the manufacturer’s instructions/ guidelines. Once removed, disconnect all the power connections. 2. Install the reverse camera that you are going to pair with the CAM-MB12-AD, and proceed to connect the camera’s RCA connector to the female RCA of the CAM-MB12-AD.
Need help?
Do you have a question about the CAM-MB12-AD and is the answer not in the manual?
Questions and answers