Table of Contents
Advertisement
Call functions
• Voice clarity on/Voice clarity off: remove
extraneous noise and increase call quality so
that the person with whom you are speaking
can hear you clearly even if you are in a
noisy place.
• Mute/Unmute: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
• Dialer: open the dialling screen.
• Mute keys/Send keys: switch the key
tones off or on.
To communicate with answering machines
or computerised telephone systems,
Send keys must be selected.
• Phonebook: access the contact list.
• Send DTMF: send the DTMF (Dual tone
multi-frequency) tones as a group. The
DTMF tones are the tones used in phones for
tone dialling, sounding when you select the
number keys from the dialling screen.
42
This option is helpful for entering a password
or an account number when you call an
automated system, like a banking service.
• Message: read an incoming message and
send a new message.
• Join: set up a multi-party call by adding a
caller on hold to a currently active call. You
can include up to five people on a
multi-party call.
• Split: have a private conversation with the
selected participant. The other participants
can converse with each other. After the
private conversation, select Join to return
both private participants to the multi-party
call.
• Transfer: transfer the currently active call
to a caller on hold. The two callers can talk
to each other, but you are disconnected from
the call.
• Remove: disconnect the selected
participant.
p. 71
Advertisement
Table of Contents
