Download Print this page

Aquatic 19751 Assembly Instructions

75/90 gallon upright aquarium stand

Advertisement

Quick Links

Thank you for purchasing this
quality piece of furniture.
Aquatic Fundamentals is dedicated
to providing a quality product and
will make every attempt to deliver
customer satisfaction.
BEFORE BEGINNING ASSEMBLY: Please review the parts list to ensure that you have all the parts.
If you find missing or broken parts, or you need assembly guidance, call toll free, 1-888-627-2601 and we'll be happy to help.
PARTS
1
2x
2
4x
11
85292
Rev 01/20
85302
Rev 09/22
75/90 GALLON UPRIGHT AQUARIUM STAND
PLEASE, DO NOT RETURN THIS MERCHANDISE TO THE STORE.
2x
12
2x
1x
5
ASSEMBLY INSTRUCTIONS
HARDWARE
A
B
3x
16x
E
1x
4x
J
K
L
M
DOOR HINGE HARDWARE BAG
ASSEMBLY & CARE
�ASSEMBLE FURNITURE ON THE CARTON OR CARPET TO PROTECT FINISH.
�CLEAN FURNITURE WITH A SOFT COTTON MOISTENED WITH WATER.
�DO NOT USE ABRASIVES
�DO NOT LEAVE WATER ON STAND'S SURFACES. WATER CAN DAMAGE THE
STANDS SURFACE AFTER PROLONGED CONTACT.
IMPORTANT SAFETY INFORMATION
PLEASE READ ALL OF THE FOLLOWING INFORMATION BEFORE
ASSEMBLING & USING. PRODUCT IS NOT A TOY. NEVER ALLOW SMALL
CHILDREN TO TOUCH, CLIMB ON OR PLAY WITH AQUARIUM STAND.
WHERE TO PLACE YOUR AQUARIUM
Use only an aquarium stand designed to support the weight and size of your
aquarium. The filled weight of an aquarium is approximately 10 to 12 pounds
per gallon. This stand is designed only for use on level surfaces. Failure to
place your stand on a level surface could cause the aquarium to leak, crack
or even tip or fall. Never tip the stand from the upright position.
MOVING YOUR AQUARIUM STAND
Always position the stand in the desired location before putting the
aquarium tank in place. Never attempt to move the stand with the aquarium
in place. Never remove an aquarium tank from the stand unless the
aquarium tank is completely empty. Never carry the stand by the top.
MODEL 19751
Customer Service
5400 Doniphan Drive
Neosho, MO 64850
Email us at:
service@marcogroupinc.com
Visit our website:
www.marcogroupinc.com
C
60x
F
G
20x
TOOLS
REQUIRED
#2 Phillips Screwdriver
D
1x
H
NOTE:
These shelf
pins are not
used on this
model.
4x

Advertisement

loading
Need help?

Need help?

Do you have a question about the 19751 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aquatic 19751

  • Page 1 5400 Doniphan Drive Neosho, MO 64850 Thank you for purchasing this quality piece of furniture. Email us at: service@marcogroupinc.com Aquatic Fundamentals is dedicated to providing a quality product and Visit our website: will make every attempt to deliver www.marcogroupinc.com customer satisfaction.
  • Page 2 STEP 1 STEP 5 Attach fastener block “G” to legs “11” and “12” as shown with (1) screw “C”. Note orientation of the block to the leg edge. Repeat for all legs. Attach latch “E” to underside of top using (2) screws “A”...