NEC P502W User Manual page 33

3. Make settings for each item as required.
ENABLE ����������������� Select to enable or disable the event�
DAY ������������������������ Select days of the week for the program timer� To execute the program from Monday to Friday, select [MON-
FRI]�
To execute the program in everyday basis, select [EVERY DAY]�
TIME ���������������������� Set the time to execute the program� Enter time in 24-hour notation�
FUNCTION ������������� Select a function to be executed� When [POWER] is selected, you can set powering ON/OFF at [ADVANCED
SETTINGS], when [SOURCE] is selected, you can set video signal at [ADVANCED SETTINGS] and when [ECO]
is selected, you can set [OFF]/[AUTO ECO]/[NORMAL]/[ECO] for ECO mode at [ADVANCED SETTINGS]�
ADVANCED SETTINGS �� Based on the selected item in [FUNCTION], select to power ON/OFF, a type of video source, and setting ECO
MODE to OFF/AUTO ECO/NORMAL/ECO�
REPEAT ������������������ Place a check mark to repeat the program continuing basis� To use the program this week only, clear the
check mark�
4. Focus on [OK] and press the ENTER button.
This will complete the settings.
You will be returned to the [PROGRAM LIST] screen.
5. Focus on [BACK] and press the ENTER button.
You will be returned to the [PROGRAM TIMER] screen.
6. Focus on [OK] and press the ENTER button.
You will be returned to the [TOOLS] screen.
NOTE:
• Up to 30 different timer settings can be programmed.
• Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ENABLE] check box will be
cleared automatically and the program will be disabled.
• If several programs are set at the same time, these programs are executed in order of the program list number.
• The on-time setting will not be executed while the cooling fans are running or an error is occurring.
• If the off-time setting is expired under the condition in which the power off is not possible, the off-timer setting will not be executed
until the power off becomes possible.
• Programs not marked with a check mark in [ENABLE] of the [EDIT] screen will not be executed even if ENABLE for the Program
Timer is not activated.
• When the projector is turned on by using the program timer and if you want to turn off the projector, set the off-time or do it
manually so as not to leave the projector on for a long period of time.
33
8. TOOLS