Table of Contents
Advertisement
Replace the Battery
1. Gently squeeze the tabs at the base of the
thermometer and pull out the battery compartment
drawer.
2. Remove and safely discard the old battery. Insert a
new CR-2032 lithium button cell battery. Follow the
polarity diagram in the battery compartment.
3. Gently push the battery compartment drawer back
into the thermometer.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used bat-
teries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
OPERATION
Using the Thermometer
High/Low Records
The "HIGH" and "LOW" temperature records are automatically cleared every
24 hours. The time records clear each day is determined by the time the battery
was installed. For example, if the battery was installed at 6:00 pm, then high/
low records will reset at 6:00 pm daily.
Care & Maintenance
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives.
4
Advertisement
Table of Contents
