Battery Type; Package Contents; Markings On Tool; Description (Fig. A) - DeWalt XR DCF900P2T Original Instructions Manual

Table of Contents

Advertisement

battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack may show the
L
following pictographs:
Read instruction manual before use.
p
See Technical Data for charging time.
q
Do not probe with conductive objects.
r
Do not charge damaged battery packs.
s
Do not expose to water.
t
Have defective cords replaced immediately
u
Charge only between 4 ˚C and 40 ˚C.
v
Only for indoor use.
x
Discard the battery pack with due care for
the environment.
y
Charge battery packs only with designated D
chargers. Charging battery packs other than the
designated D
WALT batteries with a D
e
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.
B
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
A
TRANSPORT (with built‑in transport cap). Example: Wh
rating indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The following tools operate on an 18 volt battery pack: DCF900
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB184LR,
DCB185, DCB187, DCB189, DCBP518, DCB546, DCB547,
DCB547G, DCB548, DCBP034. Refer to Technical Data for
more information.

Package Contents

The package contains:
1 Impact wrench
1 Charger
1 Li‑Ion battery pack (C1, D1, E1, H1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li‑Ion battery packs (C2, D2, E2, H2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li‑Ion battery packs (C3, D3, E3, H3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
1 TSTAK Kitbox with T models
1 Automotive Foam Tray with G models
1 Protective Tool Boot with G models
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D
trade names are those of their respective owners.
Check for damage to the tool, parts or accessories which may
have occurred during transport.
Take the time to thoroughly read and understand this manual
prior to operation.

Markings on Tool

The following pictograms are shown on the tool:
a
g
f
n
WALT
e
WALT
e
Date Code Position (Fig. B)
The date code
is printed into the housing.
Example:

Description (Fig. A)


Trigger switch
1
Forward/reverse button
2
Anvil
3
Battery release button
4
WALT is under license. Other trademarks and
e
Read instruction manual before use.
Wear ear protection.
Wear eye protection
Visible radiation. Do not stare into light.
 10 
, which also includes the year of manufacture,
2022 XX XX
Year and Week of Manufacture
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
English
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xr dcf900Xr dcf900h2t

Table of Contents