Table of Contents
Advertisement
Pause dialling
When you call an automated system, like a
banking service, you are required to enter a
password or account number. Instead of
manually entering the numbers each time, you
can enter the necessary DTMF tones separated
by pauses before dialling.
DTMF tones allow you to communicate with
computerised telephone systems for example,
voicemail or telebanking systems.
1. In Idle mode, enter the phone number you
want to dial, such as a bank's teleservice
number.
2. Press <Options> and select Hard Pause or
2sec Pause to insert a pause.
• Hard Pause: insert a hard pause.
Numbers after the "P" pause will be sent
when you press [TALK].
• 2sec Pause: insert a 2-second pause.
Numbers after the "T" pause will be sent
automatically.
3. Enter a number to be sent after the pause,
such as your account number, PIN, etc.
4. Repeat steps 2 and 3 to add more pauses
and numbers, if necessary.
5. Press [TALK] to make a call.
6. After connecting, wait for a prompt from the
system, and then press [TALK] at each
prompt, if applicable.
The DTMF tones are sent.
Answering a call
When you receive an incoming call, the phone
rings and displays the incoming call image.
Press <Answer> or [TALK] to answer the call.
27
Advertisement
Table of Contents
