Summary of Contents for JWA PINE CREEK 69489
- Page 1 ASSEMBLY INSTRUCTION PINE CREEK LAMP TABLE ITEM CODE 69489 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
- Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly.
- Page 3 PARTS LIST Top panel Bottom panel Metal frame Connection pipe...
- Page 4 STEP 1: Install fitting D to E1, and fix the E2 to E1 with fitting A, the connection with fitting C and B for installation reinforcement. STEP 2: Fix the panel 2 to the E2 with fitting A.
- Page 5 STEP 3: Fix the panel 1 to the E2 with fitting A. STEP 4: Install fitting H to the side of panel 1 with fitting G, Punch holes in the wall at the appropriate position and insert the glue I, lock screw F through H to the wall.
- Page 6 ASSEMBLY IS COMPLETE...
- Page 7 SAFETY BRACKETS INSTRUCTIONS 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
- Page 8 To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the PINE CREEK 69489 and is the answer not in the manual?
Questions and answers