Table of Contents
Advertisement
S S e e t t u u p p
Lock Code
(
)
0-6-2
This feature allows you to change your current lock
code to a new one. The lock code is preset to "0000"
at the factory.
Enter a new, four-digit lock code and then press the
soft key.
Save
Restriction
(
0-6-3
This feature allows you to restrict all of your outgoing
calls from your phone, except for emergency calls
using the standard emergency numbers or three
numbers programmed in the Emergency # menu (
0-6-4).
Select On to restrict the calls, or Off to cancel the
restriction.
Emergency Numbers
Your phone provides the option of storing three
emergency numbers. All of these numbers can be
manually dialed at any time, even when your phone is
locked or all of the outgoing calls are restricted.
IMPORTANT NOTICE!
A connection cannot always be guaranteed, due to
various transmission methods, network parameters
and user settings used to complete a call from your
wireless phone. Therefore, emergency calling may not
be available on all wireless networks at all times.
114
)
(
)
0-6-4
DO NOT depend on this phone as a primary method of
dialing 191 or for any other essential or emergency
communications.
Remember to always turn your phone on and check for
the adequate signal strength before placing a call.
To store an emergency number:
1. Press the
or
key to select a location and
press the Select soft key.
2. If necessary, clear the old number by holding down
the CLR key.
3. Enter the number you want to store.
Each emergency number can be up to 24 digits long.
4. Press the
soft key to store the number.
Select
To make an emergency call in the lock mode, simply
enter a programmed number, and then press the
key.
S S e e t t u u p p
115
Advertisement
Table of Contents
