Download Print this page

Advertisement

Quick Links

Quick Start Guide
What's in the box?
Sensor
Medium Boot
(Size 4 Strap
Pre-Attached)
Small Boot
(Size 3 Strap
Pre-Attached)
Size 1 and
Size 2 Straps
Not intended for use as a medical device or
to replace a medical device. Do not use it to
diagnose, cure, treat, alleviate, or prevent
any disease or health condition.
vitals+
Plug the Sensor Magnetic Charge
Cable into the 5W power adapter.
Sensor
5W
Charge Cable
and Cable Clip
5W Sensor
Charge Adapter
Peel and stick the cable clip
to secure the sensor charge cable.
Download the Stork app and follow instructions.
Charge the sensor
Connect the magnetic end of the cable to the
sensor. Fully charge the sensor before use.
The sensor is fully charged
when the LED turns white.
Pair the sensor to the app
The app screens shown in this document might
differ from the actual ones displayed in the app.
Add straps to sensor and boot
Size 1 strap
(for newborn foot)
Slide on
Slide on
Remove sizes 1 and 2
from paper sleeve.
SIZE
1
In paper sleeve
SIZE
2
In paper sleeve
SIZE
3
Preattached on small boot
SIZE
4
Preattached on medium boot
Ankle
Longer strap
Sensor
Sensor
Shorter strap
Shorter strap

Advertisement

loading
Need help?

Need help?

Do you have a question about the vitals+ and is the answer not in the manual?

Questions and answers

Summary of Contents for Stork vitals+

  • Page 1 Small Boot Pair the sensor to the app Remove sizes 1 and 2 (Size 3 Strap from paper sleeve. Pre-Attached) Download the Stork app and follow instructions. Ankle SIZE Longer strap Size 1 and In paper sleeve Size 2 Straps...
  • Page 2 Dampen a cloth with water to wipe the Strap Tightness components of the Stork System (sensor Check the Strap Length is shown in the example). Bleach wipes or 70% isopropyl alcohol can also be used.