felton industries Feltonmix Anti-Scald Washer Instructions

Instruction for fi tting Anti-Scald Washer
1
1 / x 7
8
mounting screws
Refer to installation leafl et for Feltonmix Shower Mixing Valves.
Step 4 should read: Position the wallplate over the valve outlet. Position
the anti-scald washer in the recess provided and secure by fi tting the
1
two 1 / x 7 screws through the slots of the anti-scald washer and into
8
the valve body lugs.
In normal cases, the fixing screws will be in the mid-slot position as
shown above.
Tighten screws alternately until wallplate is firmly clamped to the wall.
Warning: Do not over-tighten.
To provide a warmer shower, loosen the two fixing screws, rotate the
anti-scald washer slightly clockwise and re-fasten.
To provide a cooler shower, loosen the two fixing screws, rotate the
anti-scald washer slightly counter-clockwise and re-fasten.
NZ Tollfree 0800 743 358
The Perfect Shower Every Time
Felton Industries Limited
sales@felton.co.nz
NORMAL POSITION
OF WASHER
NZ Faxfree 0800 329 335
www.felton.co.nz
Stop