3
USB-C (USB 3.2 Gen 1) port x 2
With Computer enabled, you can use a USB-C to USB-C cable (which supports
•
USB 3.2 Gen1, DP1.2, and later protocols) to connect the computer to a monitor.
With Use as monitor enabled, you can use a USB-C to USB-C cable (which
•
supports USB 3.2 Gen1, DP1.2, and later protocols) to connect the computer to a
device such as a phone or laptop.
You can charge connected devices such as phones when the computer is powered
•
on.
4
Headset port
Connects to a headset.
5
Speaker
The speakers output sound.
6
Microphone x 4
The computer is equipped with four microphones which can better capture sound
or voices when used with audio processing apps.
7
Power button
When the computer is powered off, press the Power button to power on the
•
computer.
When the computer is powered on, press and hold the power button for
•
approximately 10 seconds to force shutdown the computer.
8
USB-A (USB 3.2 Gen 1) port x 2
Connects to mobile phones, USB drives, and other external devices to transfer
•
data.
You can charge connected devices such as phones when the computer is powered
•
on.
9
Charging port
Connects the power cable.
Powering On and Off the Computer
After the computer is set up, press the Power button until the screen lights up, which
indicates that the computer is powered on.
When using the computer, click
powering off, or restarting.
Force shutdown: Press and hold the Power button for more than 10 seconds. Note that
this will result in the loss of any unsaved data.
>
to switch the computer between Sleep mode,
Get to know your computer
2