Advertisement
NOTICE
* Please make sure that you have all parts indicated and they are in good
hardware list below for guidance.
the finish during assembly.
* If you are having difficulty, our friendly Customer Care team is always
here to help. Please email customersupport@safavieh.com
PREPARATION
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contents list and hardware contents list.
product
15 minutes.
* Tools required for assembly (included) : Allen key
CARE AND MAINTENANCE
spill immediately and avoid common hazards such as hot dishes, harsh solvents
dampened with water or furniture polish. On highly used surfaces we
recommend applying a quality paste wax which should be used on a regular
you apply the wax depends on how much wear the furniture receives.
Part List and Hardware List
PIECE
DESCRIPTION
A
Table Top
B
Table Leg
HW 1
Jcbb Bolt M8 x 0.5 x 70mm
HW 2
Spring Washer 8mm
HW 3
Flat Washer 8mm
HW 4
Allen key
PICTURE
QUANTITY
1x
4x
8x
8x
8x
1x
Item Id : DTB1402
Product Dimensions : 51.18" (39.37") W x 31.49" D x 29.13" H
Weight capacity - 248 LBS
Warning : Do not stand on table.
Warning : Do not over torque bolts.
Advertisement
Table of Contents
Related Manuals for Safavieh Furniture DTB1402
Summary of Contents for Safavieh Furniture DTB1402
- Page 1 finish during assembly. * If you are having difficulty, our friendly Customer Care team is always Item Id : DTB1402 here to help. Please email customersupport@safavieh.com PREPARATION Product Dimensions : 51.18” (39.37”) W x 31.49” D x 29.13” H * Before beginning assembly of product, make sure all parts are present.
- Page 2 PREPARATION * Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list. uct. * Tools required for assembly (included) : Allen key * If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com Step 1 : Place the table leg (B) in position and screw in the bolts (HW1).
- Page 3 HOW TO USE Step 1 Step 2 Step 3 Unlock the table lock and glide at both side. Step 4 Step 5 Step 6 Lock the table lock and glide Please push from both at both side when the left side, allign the brass pin and right top panel are with the hole.
Need help?
Do you have a question about the DTB1402 and is the answer not in the manual?
Questions and answers