Itek I60017 Safety & Instruction Manual page 7

CD PLAYER
1. Short press the Power/Mode button on
the control panel or the Mode button
on the remote control to select the CD
function. The LED screen will display 'cd'.
2. Short press Open/Close on the control
panel or press the Open/Close button on
the remote control to eject the CD tray.
Press the Eject button again to close the
tray once you have placed your CD inside.
3. Press the Play/Pause button on the
remote or control panel to begin CD
playback.
4. Adjust the volume using the Volume + and
Volume- buttons on the remote control.
5. Use the Skip Forward and Skip Backward
buttons to skip tracks.
Repeat:
Press the repeat button during playback to
select a repeat function.
Press repeat once to repeat 1 track. Press the
repeat button twice to repeat all tracks.
Press the repeat button three times to turn off
repeat.
CD Programming:
Up to 20 tracks can be programmed in any
order. Before attempting to program, press the
Stop button.
1. Make sure the CD function has been
selected and CD playback has been
stopped using the Stop button.
2. Press the program button.
3. Select the track you wish to program
using the skip buttons.
4. Once the required track has been
selected, press the program button to
store the track or song into memory.
5. Repeat steps 3 & 4 to store additional
songs or tracks into memory.
6. When all the desired songs or tracks have
been programmed, press the Play/Pause
button to play the songs/tracks in the new
assigned order.
7. Press the Stop button to stop
programmed playback.
8. Remove all programmed memory by
pressing the stop button repeatedly.
Bluetooth:
1. Press the Power/Mode on the control
panel or press the mode button on the
remote repeatedly until the 'bt' shows on
the LED screen. The LED will flash until a
device has been paired with the speaker.
2. Enable Bluetooth on your device to pair
it with your jukebox by selecting 'I60017'
from the listed devices on your smart
phone/tablet. If a password is required,
press '0000'.
3. You can now play or skip songs using
your Bluetooth device, remote control or
jukebox control panel.
Radio:
1. Press the Power/Mode button on the
control panel or press the mode button
on the remote repeatedly until you have
selected FM mode.
2. Ensure the FM antenna has been fully
extended.
3. Press the Skip Forward and Skip
Backward buttons to select the desired
FM radio station.
www.itek-products.co.uk
7