•
Place the end of the drain hose (A) downwards in a washbasin.
•
Place the end of the drain hose (B) approx. 100 cm above the floor
and in a washbasin or bathtub.
Without pump
1.
Set the selector switch to a mode as desired.
2. Set the Wash/Drain selector switch to the "Wash" position.
3. Set the water inlet selector switch to the "Wash" position.
4. Place the clothes that should be washed into the washing
drum.
5. Pour water into the washing drum, then add detergent.
6. Set the washing timer.
7. After washing, set the selector switch to the "Drain" position or
set the Wash/Drain selector switch to the "Drain" position.
Flushing
1.
Set the selector switch to the "Normal" position or set the Wash/Drain selector switch to the
"Wash" position.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 64217–64219
With pump
Page 8
03 2023-1