Page 1
SIDEWALL VENT HOOD Model: SWH-4"-8" SWH-4 Model SWH-5-8 Models READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION. This device MUST be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition of...
Page 2
This device should be installed in accordance with the National Fuel Gas Code ANSI Z223.1 (See Requirements Below) and any local codes which are applicable. All individual or multiple appliance vents must enter the vent system on the inlet side of the venter. 1.
Page 3
INSTALLATION SAFETY INSTRUCTIONS CAUTION: This device must be installed by a qualifi ed installer in accordance with the manufacturer's installation instructions and applicable codes. 1. Plan the vent system layout to avoid the possibility of accidental contact with concealed wiring or plumbing inside of wall.
Page 4
This manual may be downloaded and printed from the Field Controls website (www.fi eldcontrols.com) This manual may be downloaded and printed from the Field Controls website (www.fi eldcontrols.com) WARRANTY WARRANTY For warranty information about this or any Field Controls product, visit: For warranty information about this or any Field Controls product, visit: www.fi eldcontrols.com/ventCool...
Need help?
Do you have a question about the SWH-4 and is the answer not in the manual?
Questions and answers