Advertisement
Quick Links
ASSEMBLY INSTRUCTION
6PCS PATIO SOFA SET
WF302518; WF302519; WF302520
Notice
1. 50% Tighten before fixings all screws, Allen
wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make
sure it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during
assembly, please loosen all all the other screws to
50% and continue the assembly process.
5. If the item is not stable, please loosen all the
screws, adjust it on a flat ground and tighten up all
screws again.
6. Note: If one or more screws are fully tightened
during assembly, chances are the others will not
be aligned with holes. In addition, all the holes are
disigned to be relatively larger to provide more
space for the adjustment of the screws.
01/10
Advertisement
Summary of Contents for Modern WF302518
- Page 1 ASSEMBLY INSTRUCTION 6PCS PATIO SOFA SET WF302518; WF302519; WF302520 Notice 1. 50% Tighten before fixings all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable.
- Page 2 (x2) (x2) 02/10...
- Page 3 2 pcs 3 pcs 3 pcs 2 pcs 1 pc 1 pc 2 pcs 2 pcs 2 pcs 4 pcs 1 pc 2 pcs 2 pcs 4 pcs 4 pcs 03/10...
- Page 4 4 pcs 2 pcs Bolt M6x90 mm Bolt M6x60 mm Bolt M6x70 mm (6 pcs)+extra 1 pc (6 pcs)+extra 1 pc (6 pcs)+extra 1 pc Screw M7x90 mm Screw M6x40 mm 12 pcs (+extra 2 pcs) (8 pcs)+extra 1 pc (24 pcs)+extra 2 pcs Allen key M4 (2 pcs)
- Page 5 WF 300518 G x2 K x1 A x2 L x2 I x2 H x2 J x4 M x2 N x2 Q x2 WF 302519 F x1 E x1 D x2 N x2 WF 302520 P x4 C x3 B x3 HARDWARE O x4 05/10...
- Page 6 Step 1 x2 The hole is at the bottom This is to assist 1 on the left and 6 , This is to assist 3 on the left and 6 , you need to take 1 on the right you need to take 3 on the right out after turning 1 on the left and 6 , two chairs are the same out after turning 3 on the left and 6 , two chairs are the same (accessory part is added to hardware)
- Page 7 Step 4x2 100% N x1 O x1 P x1 Step 6 Step 5 K x1 L x1 5 x2 M x2 5 x2 Step 7 Step 8 100% L x1 5 x4 07/10...
- Page 8 Step 9 x2 Step 10 x2 G x1 I x1 5 x2 J x2 5 x2 Step 11 x2 H x1 5 x4 Step 12 x2 100% Q x1 08/10...
- Page 9 Step 13 The hole is at the bottom This is to assist 1 on the left and 6 , This is to assist 3 on the left and 6 , you need to take 1 on the right you need to take 3 on the right out after turning 1 on the left and 6 , out after turning 3 on the left and 6 , (accessory part is added to hardware)
- Page 10 Step 15 The the bottom of the backrest has holes, the top doesn't. E x1 2 x2 4 x4 Step 16 100% N x1 O x1 P x1 Step 17 10/10...
Need help?
Do you have a question about the WF302518 and is the answer not in the manual?
Questions and answers