SEQURE MSS12 Manual

MSS12 Intelligent Soldering Station Manual
Thank you for using this product. Please read the manual carefully before using it to avoid errors in your operation.

1. MSS12 Introduction

MSS12 intelligent soldering station comes with 0.91 inch OLED display, supports PD3.0, DC5525 12V-25V/3S-6S power supply,
programmable firmware upgrade, Celsius and Fahrenheit switching, compatible with T12 soldering iron tips, the temperature can
be calibrated and compensated, and the intelligent temperature control can reach plus or minus 1 degree.

2. Menu Introduction

3
1
Work
2
Main Interface
（1） Main Interface
Main Icon
interface
display
Stop
Work
Sleep
Soldering iron tip warning
C-T
H-V
1
High temperature warning
H-T
L-V
P-T
2
20.0V
300℃
Check Tip Soldering iron tip warning
High-T High temperature warning
3
High-V
Low-V
Pcb-T
300℃
4
100%
5
（2） Level 1 Menu, Level 2 Menu
Level 1 menu Level 2 menu
1.Tcomp
2.Buzzer
3.TempUnit
4.WorkTemp
Iron
5.StartHeat
6.FactorySet
7.TempShield
8.TempStep
1.SleepTime
2.SleepTemp
3.IdleTime
Idle
4.Sensitive
5.ScreenOpen
o
5
8%
Icon description
Stop mode
Short press the rotary switch to switch between working mode and stop mode.
Work mode
Sleep mode
Please readjust the position of the soldering iron tip or replace the soldering iron tip.
After the warning condition is eliminated, the warning icon will automatically change to Stop.
Please use DC12-25V/3S-6S power supply. After the warning condition is eliminated,
High voltage warning
the warning icon will automatically change to Stop.
Please disconnect the power supply, cool the soldering iron tip to room temperature,
and then re-energize to work. After the warning condition is eliminated, short press or turn
the rotary switch and the warning icon will change to Stop.
Please increase the supply voltage or decrease the LowVolt setting value.
Low voltage warning
After the warning condition is eliminated, short press or turn the rotary switch and the
warning icon will change to Stop.
Please disconnect the power supply, cool the soldering iron to room temperature,
PCB high
and then re-energize to work. After the warning condition is eliminated,
temperature warning
short press or turn the rotary switch and the warning icon will change to Stop.
Power supply voltage
Soldering iron
tip temperature
Please readjust the position of the soldering iron tip or replace the soldering iron tip.
Please disconnect the power supply, cool the soldering iron tip to room temperature,
and then re-energize to work.
High voltage warning
Please use DC12-25V/3S-6S power supply.
Low voltage warning
Please increase the supply voltage or decrease the LowVolt setting value.
PCB high
Please disconnect the power supply, cool the soldering iron to room temperature,
temperature warning
and then re-energize to work.
Working temperature
Turn the rotary switch to set the working temperature value.
setting value
Power percentage
Temperature compensation
Temperature unit
Working temperature
Automatic heating at startup
Restore factory settings
Stable temperature display
Main interface working temperature setting step value
Sleep temperature
Wake-up sensitivity
Standby screen display
Level 1 Menu
Method of operation
/
/
/
/
Description
Buzzer
Sleep time
Standby time
1. TComp O c
2. Buzzer ON
Level 2 Menu
Default value Setting range
0℃ -20℃-20℃
ON
℃
300℃ 100℃-450℃
OFF
OFF
ON
10
180s
200℃ 100℃-450℃
360s
5
ON
o
OFF/ON
℃/℉
OFF/ON
OFF/ON
OFF/ON
10-50
60-990s
60-990s
1-30
OFF/ON