Hitachi RAS-E70YCAB Operation Manual page 15

HOW TO SET THE SLEEP TIMER
By pressing (SLEEP) button during DEHUMIDIFYING, COOLING or FAN operation, the unit
shifts the room temperature and reduces the fan speed.
SLEEP
NOTE
If you set the sleep timer when the off-timer or on-timer has been set earlier, the sleep timer becomes
●
effective instead of the off-timer or on-timer.
The indoor fan speed of air conditioner does not change even when fan speed button is pressed.
●
Mode
1 hour
4
Sleep timer
Air Sleep Timer: The device will continue working for the designated
number of hours and then turn off.
Point the signal window of the remote controller toward the indoor unit,
and press the SLEEP button.
The timer information will be displayed on the remote controller. The
TIMER lamp lights with a beep from the indoor unit.
To cancel SLEEP TIMER operation.
Press (ON/OFF) button.
Room air conditioner will switch off.
●
Press (SLEEP) button again until off time, "
of hour disappear from the remote controller display.
A beep sound emitted from indoor unit and the (TIMER) lamp on the
●
indoor unit turns off.
SLEEP TIMER operation is cancelled.
●
– 15 –
Indication
2 hours 3 hours 7 hours
4 4 4
Sleep timer off
1
" and number