Hardware Contents; Preparation - Dyna-Glo DGH474CRN Manual

Hardware Contents

AA
2X
EE
2X
M6 Wing
Nut

Preparation

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list on previous page and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 50 minutes with 2 people.
THIS UNIT IS HEAVY. Two people required for safe assembly.
Two people required for safe assembly. Some parts may contain sharp edges.
Wear protective gloves if necessary. Read and follow all safety statements,
warnings, assembly instructions and use and care instructions before attempting
to assemble and use.
Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle
BB
2X
M10 Nut
FF
2X
M6 Spring
Washer
CC
2X
M10
Wrench
GG
2X
M6 Plain
Washer
CAUTION
6
DD
26X
Screw
HH
10X
Screw