Care And Maintenance - Kobalt 9400 Manual

ASSEMBLY INSTRUCTIONS
1 Assembling the legs
•With the top shelf(A) upside down, attach the
legs (B and C) to the top shelf, as shown. Use a
rubber mallet to seat them completely in place.
•Using a Phillips screwdriver, secure the legs (B
and C) to the top shelf(A) with the Phillips head
screws(AA) (one per leg). Do not overtighten.
2 Attaching the bottom shelf
and casters
•Position the bottom shelf(D) on the legs(B and C)
as shown.
•Place the front casters(F) into the pockets into the
front corners of the bottom shelf, as shown. Secure
them with four screws (BB), lock washers (CC), and
hex nuts (DD) each.
•Place the swivel casters(E) into the pockets in the
back corners of the bottom shelf(D), as shown.
Secure them with four screws (BB), lock washers
(CC), and hex nuts (DD) each.
B
C
C
B
AA
A
- 4 -
3 Assembling the Cable Racks
•Click Cable Racks(G) on at your desirable
place.

CARE AND MAINTENANCE

•Check the overall condition of the product periodically.
•Tighten any loose bolts and repair or replace any broken parts.
To dislocate, press here first.
Printed in China
- 5 -
G