Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for orangemarine VHF WP 200
- Page 2 INTRODUCTION Thank you for purchasing our VHF WP 200. Please read the instructions carefully before using the VHF. This multifunction marine radio has been designed in accordance with IMO (International Maritime Organisation) standards. You can use this VHF with its IPX7 waterproofing technology anywhere – even in rough seas.
- Page 3 VHF on the water. ACCESSORIES The VHF WPF 200 is sold with the following accessories: 1 x VHF WP 200 1 x USB cigarette lighter charger 1 x Antenna 5 x NiMH batteries (850 mAh)
-
Page 4: Attaching The Belt Clip
ATTACHING THE BELT CLIP To attach the belt clip to your VHF, slide it from top to bottom into the slot. You will hear it click into place. Belt clip stopper To remove the belt clip, move the stopper away with the tip of your finger then push it upwards. -
Page 5: Getting Started
GETTING STARTED HOW TO USE 1 – [PTT] : Hold down to transmit. Release to receive. 2 – [ON/OFF] : Hold for 2 seconds to switch the VHF on or off. 3 – [C/16] : Press to select channel 16. Hold for 1 second to select the calling channel. Hold for 3 seconds while the calling channel is selected to enter programming mode. -
Page 6: Screen Display
SCREEN DISPLAY Icon Description Displays during transmission Displays during reception Displays when low power is selected Displays for the selected channel group: USA/CAN/INT American/Canadian/international Displays when the TAG channel is selected as operational channel Displays when the buttons are locked Displays when the weather channel is selected Displays when a weather alert has been issued Indicates the battery is full... - Page 7 Changing the calling channel: Press [C/16] for 1 second to select the calling channel. CALL displays on the screen with the calling channel number. Then press [C/16] for 3 seconds to hear a BEEP which indicates that you can now set the calling channel. Use the [▲]/[▼] buttons to navigate between the different channels.
-
Page 8: Navigating Through The Menu
NAVIGATING THROUGH THE MENU: The menu is used as follows: Press the [MENU] button to enter the menu. Then use the [▲]/[▼] buttons to select the desired submenu. Press [MENU] again to change the selected setting. Use the [▲]/[▼] buttons to navigate between the different options. - Page 10 VHF WP 200 ORANGEMARINE www.orange-marine.com...