Chevrolet Corvette 2023 Owner's Manual page 210

Chevrolet Corvette Owner Manual (GMNA-Localizing-MidEast-16287460) -
2023 - CRC - 4/26/22
210 Driving and Operating
1
: Press to turn cruise control on or off.
A white indicator comes on in the
instrument cluster when cruise is turned on.
+RES : If there is a set speed in memory,
press briefly to resume to that speed or
press and hold to accelerate. If cruise control
is already engaged, use to increase vehicle
speed.
SET : Press briefly to set the speed and
activate cruise control. If cruise control is
already engaged, use to decrease vehicle
speed.
: Press to disengage cruise control
without erasing the set speed from memory.
The speedometer reading can be displayed
in either English or metric units. See
Instrument Cluster 0 78. The increment
value used depends on the units displayed.
Setting Cruise Control
1
If is on when not in use, SET or +RES
could get pressed and go into cruise when
1
not desired. Keep off when cruise is not
being used.
1
1. Press to turn the cruise system on.
2. Get up to the desired speed.
3. Press and release SET on the steering
wheel.
4. Remove foot from the accelerator.
The cruise control indicator on the
instrument cluster turns green after cruise
control has been set to the desired speed.
See Instrument Cluster 0 78.
Resuming a Set Speed
If the cruise control is set at a desired speed
and then the brakes are applied or
pressed, the cruise control is disengaged
without erasing the set speed from memory.
Once the vehicle reaches about 40 km/h
(25 mph) or more, briefly press +RES. The
vehicle returns to the previous set speed.
Increasing Speed While Using Cruise Control
Do one of the following:
Press and hold +RES until the desired
speed is reached, then release it.
To increase vehicle speed in small
increments, briefly press +RES. For each
press, the vehicle goes about 1 km/h
(1 mph) faster.
Reducing Speed While Using Cruise Control
Do one of the following:
Press and hold SET until the desired
lower speed is reached, then release it.
To decrease the vehicle speed in small
increments, briefly press SET . For each
press, the vehicle goes about 1 km/h
(1 mph) slower.
Passing Another Vehicle While Using Cruise
Control
Use the accelerator pedal to increase the
vehicle speed. When you take your foot off
the pedal, the vehicle will slow down to the
previously set cruise speed.
is
While pressing the accelerator pedal or
shortly following the release to override
cruise control, briefly pressing SET will
result in cruise set to the current vehicle
speed.