Advertisement
C) SETTING THE TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
The hour, 24 hour, minute and second are set by the same operation.
SETTING PROCEDURE
HOUR&24HOUR
MINUTE
SECOND
Pull the crown out to the 1st position to stop the second hand at 0 (12 o'clock).
Turn the hour/minute hands in a clockwise direction to set the time.
To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired
time and then turn back (in a counterclockwise) to the desired time.
After setting the time, use a time signal to synchronize the watch by pushing crown to
the normal position to start the second hand going.
NOTE: Make sure you have correctly set AM/PM before setting the time.
These specifications might be changed without prior notice.
2 / 2
Advertisement
